User Manual

CHAPTER 7: RFID COMMANDS
COBALT HF RFID CONTROLLERS OPERATOR’S MANUAL
P/N: 17-1320 REV 01 (03-06) PAGE 95 OF 116
Command 35 will cause the controller to cycle power - effectively rebooting the device -
without clearing any stored configuration information. Command 35 will reset the
controller’s configuration to default settings when a Configuration Tag is placed in the
antenna’s RF field prior to execution.
C
OMMAND 35 (RESET C ONTROLLER)–ABX F AST C OMMAND S TRUCTURE
PARAMETER FIELD CONTENT
Header
0x02, 0x02
Command Size
0x0001
Command ID
0x35
Checksum
optional
Terminator
0x03
C OMMAND 35 (RESET C ONTROLLER)–ABX FAST C OMMAND E XAMPLE
This example resets power to the controller.
Command from Host
PARAMETER FIELD CONTENT
Header
0x02, 0x02
Command Size
0x0001
Command ID
0x35
Checksum
Optional
Terminator
0x03
Response from Controller
PARAMETER FIELD CONTENT
Header
0x02, 0x02
Response Size
0x0001
Command Echo
0x35
Checksum
Optional
Terminator
0x03
COMMAND 35:
RESET CONTROLLER