User Manual Part 1

Title
8
LRP2000 Long Range Passive Reader/Writer
Figure 3-2.
Internal Connectors
Figure 3.2 shows an internal view of the controller. It details the
locations of all internal terminal blocks needed for wiring the system.
CAUTION:
The controller contains ESD sensitive components.
Always observe ESD-sensitive handling procedures when
working inside the controller.
Terminal Blocks
The controller is equipped with removable terminal blocks to aid
wiring. The data terminals are all equipped with screw terminals which
accept AWG 28 minimum to AWG 16 maximum diameter solid or
stranded wire. The screws heads accept a 3/32 inch [2.0mm] or
[2.5mm] screwdriver blade.