User Manual Part 1

Title
16
LRP2000 Long Range Passive Reader/Writer
3.7 Ethernet Wiring
Figure 3-8. : The RJ45 Connector on the Optional Ethernet Mod-
ule
.
Because of the narrow size of the strain reliefs on the LRP2000, the
standard RJ-45 connector cannot be inserted through the strain relief.
It is recommended to loosen the nut on the strain relief, feed through
the cable, and crimp the connector in place. After the connector is
crimped onto the cable, the cable can be connected to the Ethernet
module and the excess cable withdrawn from the unit before
tightening the strain relief. Escort Memory Systems recommends
stranded cable for Ethernet wiring in areas where the unit will be
subjected to vibration.