User Manual Part 1

Title

LRP2000 Long Range Passive Reader/Writer

Outputs

The output is limited to 30Vdc when off and 500 mA. These are

maximum ratings. A device that operates at 200 mA may destroy the

output due to inrush current if that current exceeds 500 mA(e.g. an

incandescent light). The inductive "kick" (back EMF from a collapsing

magnetic field) when a relay is released can impose a voltage higher

than 30V and destroy the output transistor (use a backwards diode to

clamp the back EMF).

Figure 3-10. J20 Output Connector

4 -IN B Negative

5 + IN C Positive

6 - IN C Negative

7 + IN D Positive

8 - IN D Negative

9 GND Neutral

Table 3-4:

Output Connector Pinout

Terminal

number

Signal name Polarity

1 + OUT A Positive

2 - OUT A Negative

Table 3-3:

Input Connector Pinout

Terminal number Signal Name Polarity