User Manual Part 1

Communications Interface
30
LRP2000 Long Range Passive Reader/Writer
To change the IP address, click "Server Properties" from the menu on
the left side. This will load the Server Properties page as shown in
Figure 4.4.
Figure 4-4.
Click the "Edit" button next to the IP address field to produce a
separate window. Type or paste in the desired IP address and hit
"Enter." Follow the same procedure to change the Subnet Mask and
the Gateway Address. This will only save the information for the
display. After all of the desired parameters are entered correctly, click
"Update Settings" from the menu on the left. This will download the
configuration parameters to the Ethernet Module.