User Manual Part 1

Communications Interface
LRP2000 Long Range Passive Reader/Writer
33
E-DIAG and E-CHAN 1 Ethernet Module diagnostic
codes
The E-DIAG LED will light solidly to indicate the following errors.
These errors can be identified by the number of times that the E-
CHAN 1 LED blinks.
Number of
blinks
Error
1 EPROM
Checksum Error
2 RAM Eror
3 Network Controller
Error
4 EEPROM
Checksum Error
5 Duplicate IP
Address on
network
6 Software does not
match hardware
The E-DIAG LED and the E-CHAN 1 LEDs will blink at the same time
to indicate the following errors:
Number of
blinks
Error
4
Faulty Network
Connection
5
No DHCP Response
Received