User Manual Part 1

LRP2000 Long Range Passive Reader/Writer

1-Introduction

1.1 Introduction

Escort Memory Systems' passive read/write system is a complete

family of field-proven read/write Radio-Frequency Identification

products. The system consists of RFID tags, reader/writers, antennas,

controllers, bus interfaces, and ancillary equipment. Tags can be

attached to a product or its carrier and act as an electronic identifier,

job sheet, portable database, or manifest. Tags are read and updated

via an Escort Memory Systems Reader/Writer, through any

nonconductive material, while moving or standing still. Escort

Memory Systems' LRP-Series long range passive RFID system is the

latest in our line of high performance, industrial RFID equipment. The

passive design of the LRP read/write system uses the RF field from

the antenna to power the tag, eliminating the need for tag batteries.

The LRP passive read/write system is designed to provide cost

effective RFID data collection and control solutions to automation,

item-level tracking, and material handling applications. The LRP

system uses the internationally recognized ISM frequency of 13.56

MHZ to both power the tag, and to establish a radio link to transfer the

information.The LRP2000 is specifically designed to work with LRP-

Series passive tags, which provide 48 bytes of reprogrammable

memory, and LRP-SISO-15693 compliant tags which provide up to 8K

bytes ofreprogrammable memory.

1.2 Unpacking and Inspection

Unpack the LRP2000 and documentation and retain the original

shipping carton and packing material in case any items need to be

returned. Inspect each item carefully for evidence of damage. If any

item appears to be damaged, notify your distributor immediately. The

LRP2000 is delivered with the following components:

• LRP2000 Controller

• LRP2000 Antenna

• LRP2000 Power Supply- includes AC cord and DC cable assembly

CBL-1474

• LRP2000 Operator's Manual

• CBL-1475 controller-to-antenna cable assembly

The following user-supplied components are required for configuring a

complete system:

• LRP-S Series ISO15693-compliant Passive Read/Write Tags

• Power and Data cabling (refer to section 3.4)