User's Manual

Copyright © 2000 Escort Memory Systems
iv LRP830-Series Long-Range Passive Reader/Writer
5MENU CONFIGURATION 35
5.1 How to Enter Menu Configuration ............35
5.2 Set-up Operating Parameters ...............36
Set COM1 Parameters...................37
Set COM2 Parameters...................37
Set Operating Mode ....................37
Set RF Communication ..................39
Restore Factory Defaults .................39
Return to Main Menu ...................40
5.3 Download New Program .................40
5.4 Downloading DSP Firmware ...............40
5.5 Exit to Operating Mode ..................41
6 RFID INTERFACE 42
6.1 Introduction ........................42
Command Timeout ....................42
DeviceNet and Anticollision ABx Limitations ......44
6.2 ABx Error Codes .....................45
Non-Anticollision Error Codes ..............45
ABx Standard .......................45
ABx Fast .........................46
Anticollision Status Byte .................47
6.3 Anticollision Commands .................48
Family Interrogation ...................48
Family ID .........................48
Anticollision Index ....................49
6.4 ABx Standard Protocol ..................51
ABxS Command 4 (04H): Fill Tag ............51
ABxS Command 5 (05H): Block Read ..........53
ABxS Command 6 (06H): Block Write..........55
ABxS Command 7 (07H): Read Tag Serial Number . . . 57
ABxS Command 8 (08H): Tag Search ..........58
ABxS Command D (0DH): Continuous Block Read . . . 59
ABxS Command 10 (10H): Set Output ..........62
ABxS Command 11 (11H): Input Status .........64
ABxS Command 84 (84H): Fill Tag All .........66
ABxS Command 85 (85H): Block Read All .......68
ABxS Command 86 (86H): Block Write All .......70
ABxS Command 87 (87H): Read Tag SN All ......72