User's Manual

Copyright © 2000 Escort Memory Systems
iv LRP820-Series Long-Range Passive Reader/Writer
Set COM2 Parameters ...............36
Set Operating Mode ................36
Set RF Communication ..............38
Restore Factory Defaults ..............38
Return to Main Menu ...............39
5.3 Download New Program ..............39
5.4 Downloading DSP Firmware ............39
5.5 Exit to Operating Mode ..............40
6 RFID INTERFACE 41
6.1 Introduction ...................41
Command Timeout . . . .............41
MUX32 and Anticollision Limitations ........43
6.2 ABx Error Codes .................44
Non-Anticollision Error Codes ............44
ABx Standard...................44
ABx Fast.....................45
Anticollision Status Byte ..............46
6.3 Anticollision Commands ..............47
Family Interrogation . . . .............47
Family ID ....................47
Anticollision Index . . . .............48
6.4 ABx Standard Protocol ..............49
ABxS Command 4 (04H): Fill Tag .........49
ABxS Command 5 (05H): Block Read ........51
ABxS Command 6 (06H): Block Write........53
ABxS Command 7 (07H): Read Tag Serial Number . . 55
ABxS Command 8 (08H): Tag Search ........56
ABxS Command D (0DH): Continuous Block Read . . 57
ABxS Command 10 (10H): Set Output ........60
ABxS Command 11 (11H): Input Status .......62
ABxS Command 84 (84H): Fill Tag All .......64
ABxS Command 85 (85H): Block Read All......66
ABxS Command 86 (86H): Block Write All .....68
ABxS Command 87 (87H): Read Tag SN All .....70
ABxS Command 88 (88H): Tag Search All ......72
ABxS Command 89 (89H): EAS Set/Reset All ....73
ABxS Command 8A (8AH): EAS Start/Stop .....75
ABxS Command 8D (8DH): Continuous Read All. . . 77
ABxS Command 8E (8EH): Memory Lock All ....79