User's Manual

BALOGH 7699 Kensington Court - Brighton MI 48116 – (248) 486-RFID – www.baloghrfid.com - Subject to Modification

ERC-100/QC Transceiver

RFID Transceiver

Industrial RFID Transceiver Orange Product Range

Compatible Tags

OMX

High Speed Industrial Read-Write Tag Series

Description Characteristics

The ERC-100 Transceiver when used with a

BALOGH Control Board that supplies power to the

transceiver and operational commands allows

Reading and/or Writing of data to BALOGH RFID

Tags via an inductive electro-magnetic field that

powers the RFID Tag and communicates using

pulse width modulation and a proprietary

BALOGH protocol

The ERC-100 has an available Quick Connector

(QC) to help simplify installation.

• Power Supply (<10% Ripple) 24 V DC

• Voltage Tolerance -10% +10%

• Max Current Consumption 150 mA

• Min Ambient Temperature -25 °C

• Max Ambient Temperature +70 °C

• Distance Between Transceivers 1200mm

• IP 65-67 Rated

• Weight: 525 g

• Rislan Casing

• Polyurethane Potting

• Protected Against Polarity Reversal

• Protected Against Load Short-Circuit

QC Connector Pin-Out QC Connection to Main Board

Terminals Connections

1 +V DC

2 Output

3 Input

MALE CONNECTOR - END VIEW

4 - BLACK

1 - BROWN

2 - WHITE

3 - BLUE

4 0V DC

PAGE 1
ERC-100/QC Transceiver RFID Transceiver Industrial RFID Transceiver Orange Product Range Compatible Tags OMX High Speed Industrial Read-Write Tag Series Description Characteristics The ERC-100 Transceiver when used with a BALOGH Control Board that supplies power to the transceiver and operational commands allows Reading and/or Writing of data to BALOGH RFID Tags via an inductive electro-magnetic field that powers the RFID Tag and communicates using pulse width modulation and a proprietary BALOGH proto
PAGE 2
Dynamic Transmission Zone Static Transmission Zone Tag Compatibility Information Chart Tag Type OMX-931 Maximum Range 40 mm Typical Height at Sr 28 mm Typical Length at Sr 100 mm Typical Width at Sr 35 mm Minimum Length at Sr 60 mm Max Lateral Offset 12 mm Max Angular Offset 20 mm Dimensional Drawing FCC ID: G8630100X, This device complies with Part 15 of the FCC rules.