User's Manual
Table Of Contents
- 1. FUNCTIONS AND PERFORMANCE 4
- FUNCTIONS AND PERFORMANCE
- TECHNICAL CHARACTERISTICS
- THE POWER SUPPLY
- VERIFICATION OF THE READER
- INSTALLATION
- EXTERNAL CONNECTIONS
- INSTALLATION AND CONNECTION PROCEDURES FOR THE ASYNCHRONOUS LINKS
- OPEN COLLECTOR INTERFACE
- THE OUTPUTS (JR3)
- THE INPUTS (JR4)
- OPERATING FREQUENCY CHANNEL
- ADJUSTMENT OF THE READING RANGE
- ORIENTATION OF THE ANTENNA
- FCC Notice
- CE Notice
REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Langue/ Language Numéro / Number Code Doc. / Doc. Code Indice / Revision Index Pages
FR 13053 108 B
10/27
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
JK01 is a connector to measure the analog signal receive by the reader. These test points allow
measuring the noise with a scope and therefore the quality of the electromagnetic environment for the
installation. These test points allow measuring the analog signals from the tag.
JT01 : is the connector for the supply voltage. A female connector with screw (Phoenix with 2 points
pitch 5.08mm ref. MSTB 2,5/2-ST-5,08) must be used.
JR01 : is the connector for the open collector output . A female connector with screw (Phoenix with 5
points pitch 5.08mm ref. MSTB 2,5/5-ST-5,08) must be used.
JR02 : is the connector for the serial link (RS) . A female connector with screw (Phoenix with 5
points pitch 5.08mm ref. MSTB 2,5/5-ST-5,08) must be used.
JR03 : is the connector for the outputs . A female connector with screw (Phoenix with 6 points pitch
3.81mm ref. MSTB 1,5/6-ST-3,81) must be used.
JR04 : is the connector for the inputs . A female connector with screw (Phoenix with 4 points pitch
3.81mm ref. MSTB 1,5/4-ST-3,81) must be used.