User's Manual

REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Langue/ Language Numéro / Number Code Doc. / Doc. Code Indice / Revision Index Pages
FR 13053 108 B
6/27
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
3. THE POWER SUPPLY
The reader supply must be between 12Vdc and 24Vdc.
With 12Vdc, the current is less than 1A
With 24Vdc, the current is less than 0.6A
The extreme limits for the power supply are 11Vdc to 28Vdc : it’s very important to respect these
limits for correct operation of the readers and to avoid damage.
A led « low voltage », near the power supply connector, indicates the voltage supply is less than
11Vdc.
At the time of the “low voltage” detection, the reader enables a timer of about twenty seconds. After
this time, the reader tries to power on. If the voltage is right, the reader will turn on, if the voltage is
still too low, it enables the timer again and so one.