User's Manual

REFERENCE DU DOCUMENT / DOCUMENT REFERENCE
Langue/ Language Numéro / Number Code Doc. / Doc. Code Indice / Revision Index Pages
FR 13053 108 B
8/27
CE DOCUMENT EST LA PROPRIÉTÉ DE BALOGH IL NE PEUT ETRE COMMUNIQUÉ À DES TIERS SANS AUTORISATION ECRTITE PRÉALABLE.
THIS DOCUMENT IS BALOGH PROPERTY.IT CANNOT BE DISCLOSED TO ANY PARTY WITHOUT PREVIOUS WRITTEN AUTHORIZATION.
5. INSTALLATION
5.1. LMB_6010 family
The reader is made of a solid aluminium cast on which the circuits boards are fixed and a plastic
radome fixed with two screws.
To open the reader :
- Unscrew and remove the two screws at each end of the reader
- Remove the radome
The reader must be mounted on a support (wall...) with 4 screws (maximum diameter is 6mm) at the
corners of a rectangle of 151 x 241 mm.
The procedure for closing the reader is the reverse of that for opening.
5.2. LMB_6030 family
The LMB_6030 family uses the same base as the LMB_6010, but has a different antenna and a
waterproof case.
To open the reader :
- Remove the black plastic bushings located in the 4 angles of the grey waterproof case.
- Use the special tool and turn the 4 locking gear ( ¼ of turn)
- Remove the plastic cover of the waterproof case.
5.3. LMB_7000 family
The LMB_7000 family uses the same base as the LMB_6010 with an external monolithic antenna and
a waterproof case.
To open the reader :
- Remove the black plastic bushings located in the 4 angles of the grey waterproof case.
- Use the special tool and turn the 4 locking gear ( ¼ of turn)
- Remove the plastic cover of the waterproof case.