234567890123456789012345678901212345678901234567890123 1234567890123456789012345678901212345678901234567890123 1234567890123456789012345678901212345678901234567890123 1234567890123456789012345678901212345678901234567890123 1234567890123456789012345678901212345678901234567890123 1234567890123456789012345678901212345678901234567890123 1234567890123456789012345678901212345678901234567890123 1234567890123456789012345678901212345678901234567890123 1234567890123456789012345678901212345678901234567890123 12345678
Just Pure Magic Printer Stand JPM-1 Part Drawing Description Qty Part Drawing Description Qty Hardware List P-1 P-2 Leg Frame Back Stability Panel 2 EA 1 EA P-3 Long Metal Plates 2 EA P-4 Short Metal Plates 4 EA P-5 P-6 Forms Basket Forms Rack To Assemble: 1. Identify and Separate all the Parts and Hardware. 2. Attach Back Stability Panel (P-2) to 2 Leg Frames (P-1) using 4 Flat head Screws (A) and 4 Interior Threaded Posts (B) as shown in illustration # 1.
JPM-1 Just Pure Magic Adjustable Printer Stand Assembly Diagram Illustration # 2 4. Attach 2 Long Metal Plates (P-3) and 4 Short Metal plates (P-4) to the Leg Assembly (P-1) using 4 Square Shoulder Screws (A1), Flat Washers (K) and Wing Nuts (J). See back page for different options. [Option #3 shown here.] Note: Long Metal Plates should be attached with Channel side down, and Short Metal Plates with the channel side up. Illustration # 3 P-1 P-3 A1 K J A1 P-4 P-1 P-5 5.
1. FOR LARGE PRINTERS OPTION # 1 Attach 2 Long Metal Plates (P-3) [through outer holes] and 4 Short Metal plates (P-4) to the Leg Frames using 4 Screws (A1), 4 Flat Washers (K) and 4 Wing Nuts (J). Note: Long Metal Plates should be attached with Channel side down, and Short Metal Plates with the channel side up. A1 P-4 K J OPTION # 2 P-4 Outer Hole P-3 P-3 Outer Hole Inner Hole 3.
JPM-1 Just Pure Magic Adjustable Printer Stand For more information 1-800-749-2258 24-35” (adj) 6-29” (adj) 27" w/ glides 24" 21" Shipping Information 2.0 Cubic Feet 24 lbs. l Four top plates adjust independently to accommodate teh smallest to largest printers. l Standard with one-piece bottom forms rack and printout receiving basket. This can hold two full boxes of forms. l 2” casters included. l Ships UPS. 5” 25” 27” JPMasm.