Quick-Start Guide

Illustration # 6

6.) Screw in two Cam Posts (I) into the embedded plastic inserts in the Left Side Panel (P5) as shown in

Illustration # 5. Install two Cams (H) into the large holes in the Back Panel (P7). Install a Wood

Dowel (J) in the center hole on the edge of the Back Panel (P7). With the Cam’s (H)

arrows pointed at the Cam Posts (I), slide the Back Panel (P7) into place and turn the Cams

clockwise a quarter turn to the lock position.

7.) Center the Back Frame (P8) over the two embedded threaded metal inserts in the Left Side Panel

(P5) and secure with two Screws (A) as shown in Illustration # 6.

Illustration # 5