Quick-Start Guide

Illustration # 7

8.)

9.)

Screw in two Cam Posts (I) into the embedded plastic inserts in the Left Side Panel (P5) as shown

in Illustration # 5. Install two Cams (H) into the large holes in the Back Panel (P7). Install a Wood

Dowel (J) in the center hole on the edge of the Back Panel (P7). With the Cam’s (H) arrows

pointed at the Cam Posts (I), slide the Back Panel (P7) into place and turn the Cams

clockwise a quarter turn to the lock position.

Illustration # 8

Place two Cams (H) in the Back Panel (P7) and two Cams (H) in the Back Panel (P7) making

sure the arrows on the Cams (H) are pointe to the right as shown in Illustration # 8. Push in one

Wood Dowel (J) into the edge of the Back Panel (P7) and one Wood Dowel (J) into the edge of

the Back Panel (P7). Screw in four Cam Posts (I) into the the Right Side

Panel (P6). Move the Right Side Panel (P6) in to connect. Turn the Cams (H) a quarter turn to

lock. Secure the Back Frame (P8) to the Right Side Panel (P6) using two Screws (A).