PBL Adjustable Height Presentation Stand Assembly Instructions See back for important information
Adjustable Height Presentation Stand PBL Part Drawing P-1 P-2 P-3 Description Qty Leg Frame 2 EA Stability Panel Top Platform Part Drawing Description Qty Hardware List A Flat Head Screw 16 EA B Interior Threaded Post 8 EA C 3” Locking Casters (for Front) 2 EA D 3” Casters (for Back) 2 EA E Allen Wrench 1 EA F Caster Wrench 1 EA G Knob 2 EA 2 EA 1 EA P-4 Upper Insert 2 EA P-5 Laptop Platform 1 EA Tools Required: Philips Head Screw Driver To Assemble: Illustration
PBL Adjustable Height Presentation Stand Assembly Diagram Illustration # 2 D C B 3. Attach 2 Stability Panels (P-2) to 2 Leg Frames (P-1) using 8 Flat Head screws (A) and 8 Interior Threaded Posts (B) as shown in illustration # 2. P-2 4. Attach 2 Locking casters (C) in the front and 2 Casters (D) in the back. Tighten the Casters using Caster Wrench (F)] A P-2 P-1 P-1 A P-5 5. Attach Laptop Platform (P-5) to 2 Leg Frames (P-1) using 4 Flat Head screws (A).
Illustration # 3 6. Slide the Top Assembly into the Leg Assembly and secure at desired height using 2 Knobs (G) as shown in illustration # 3. Top Assembly 7. Tighten all screws securely using Allen Wrench (E). G Leg Assembly G Important The Balt product you have purchased is guaranteed against material and workmanship defects. This guarantee extends 1 year from date of purchase.
PBL Adjustable Height Presentation Stand 14" For more information 1-800-749-2258 18" 16-½" 18" Adj 41-½ - 47-½" 28 ½" 10" 20" 15" Black Projector Stand enhances any presentation. Middle platform extends for easy access. Shipping Information 1.7 Cubic Feet 38 lbs. 4” 25” 28” Lower wrap-lock stability panel provides storage for supplies and accessories. 3”Casters included. Ships UPS.