23456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 12345678901234567890123456789012123456
Oui Reception Table-Corner Part Drawing Description P1 Leg P2 Top Support Tube Qty Part Drawing Description Qty A Screw M6*15mm 12 EA B Allen Wrench 1 EA 2 EA 1 EA P3 Top Panel 1 EA P4 Straight Leg 1 EA READ THROUGH INSTRUCTIONS FROM BEGINNING TO END BEFORE STARTING TO ASSEMBLE UNIT. 1.) Identify and Separate all the Parts and Hardware. 2.) Place Top Panel (P3) face down on a padded surface. 3.
4. Attach the Straight Leg (P4) to the bottom side of the Table Top (P3) using four Screws (A). Tighten Screws with Allen Wrench (B). P4 B A P3 illustration #2 5. Place the Top Support Tube (P2) between the two Legs (P1) and attach with one Screw (A) at each end as shown in illustration #3. Tighten all Screws (A) with Allen Wrench (B) at this time.
Oui Reception Table Corner 31” 19” 31” 90461_3-27-14 4