Instruction Manual

Document # I17793 Rev D
© Copyright
BAND-IT-IDEX, Inc. 2009
All rights reserved
www.BAND-IT-IDEX.com
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street Denver, CO 80216-0307 USA
P: 1-800-525-0758 F: 1-800-624-3925
20 of 28
IT3000-AB
1/4” Ultra-Lok Tool
Control Module air pressure
valve is in "off" position.
Rotate Control Module valve to open position. Verify
gauges read air pressure and check all air
connections.
Remove clamp tail, if jammed remove
maintenance/flip cover and remove clamp material.
Remove or replace knife. Verify missing and or
damaged linkage.
Handle will not
adjust
Handle nut is
damaged/misaligned.
Remove handle assembly and inspect nut/housing for
damage. Replace as required.
Clamp will not
insert into tool
* = for additional assistance, contact BAND-IT
Troubleshooting
Matrix