Owner manual

Document # I17795 Rev G
© Copyright
BAND-IT-IDEX, Inc. 2009
All rights reserved
www.BAND-IT-IDEX.com
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street Denver, CO 80216-0307 USA
P: 1-800-525-0758 F: 1-800-624-3925
20 of 38
IT5000-AB
3/8” Junior
®
Tool
Control Module air pressure
valve is in "off" position.
Rotate Control Module shut-off valve to open position.
Verify that gauges read air pressure and check all
connections for air leaks.
Remove clamp tail, if jammed remove
maintenance/flip cover and remove clamp material.
Remove or replace knife. Verify missing and or
damaged linkage.
Handle will not
adjust
Handle nut is
damaged/misaligned.
Remove handle assembly and inspect nut/housing for
damage. Replace as required.
Clamp will not
insert into tool
* = for additional assistance, contact BAND-IT
Troubleshooting
Matrix