Operation Manual

95
MHU_VA portpad Multiple Pulse Denition : 0 1 1
• “MHU_VA” and “portpad” functions are congured to the same input (channel 0, device 1, input 1):
Multiple Devices dened on the same Channel, Device & Port with differing
settings 1 1 2
• there are two devices (unknown) on the same physical serial port but with dierent hardware (RS232
etc.), baud rate, data, stop or parity settings. In this case serial port 2 on channel 1, device 1 in the
conict
Full Startup Description
Software Versions
The two key versions for diagnostic purposes are:
Platform S/W Version : “(1.1 0.5 0.8)” [Operating System Version]
B&G WTP3 S/W Version : 1.0.00 [WTP3 Software Version]
Conguration Files
Cong File Path : Default_Cong [folder name for le set in use]
CAN initialisation
Initialising NDP2K Stack
CAN Channel 0 : 250Kbs [baud rate set for CAN channel 0]
CAN Channel 1 : 250Kbs [baud rate set for CAN channel 1]
CAN Channel 2 : 250Kbs [baud rate set for CAN channel 2]
Progress
This section details the start of various tasks, including conguration le loading.
NDP2K Thread Running
WTP3 sets custom speed on s3c_serial0. This is deprecated.
Initialising Variable Manager
Loading Surface Tables
Sampler : Loaded Settings
Sampler : Loaded Boat Log
Serial Thread Running
Sampler Thread Running
Deckman Comms Thread Running
Fastnet Manager Running
External Message Server started listening on port : 8080
Fastnet : User Menus Loaded
Fastnet : B&G Menus Loaded
Fastnet : Loading User Variables
Fastnet : Loading B&G Variables