User's Manual
Table Of Contents
- Package Contents
- Installation
- Using Web-based Management
- Login
- Status
- System
- Services
- Network
- Interfaces
- Hotspot
- Mobile Internet
- WWAN Setting
- Network Settings
- Reset Modem
- Manually Update Phone Number
- Manually Update MSID
- Manually Update MIP Profile
- eHRPD Menu
- Enable LTE
- U/SIM PIN Management
- Scenario 1: No mobile internet service
- Scenario 2: Mobile internet service pending
- Scenario 3: Mobile internet service enabled
- SIM Management
- Scenario 1: SIM lock absent
- Scenario 2: SIM lock present
- Preferred Network
- AT command
- Router
- WiFi
- Switch
- Diagnostics
- Firewall
- UPNP
- VPN
- Help
- Logout
- Appendix A: Vehicle Installation Guide
- Appendix B: FAQ
- Appendix C: Specifications
- Appendix D: Important Safety Information and Glossary
Using Web-based Management
46
or
Wireless
network is
enabled*:
WiFi connection of the associated SSID is enabled.
To disable WiFi connection of this SSID, click
.
Wireless
network is
disabled*:
WiFi connection of the associated SSID is disabled.
To enable WiFi connection of this SSID, click
.
* Note: The associated SSID is displayed either in the
selected submenu tab under WiFi or in the WiFi category
item Interface Configuration General Setup SSID.
Channel: Selects the WiFi channel for communication. The available
choices are:
Channel (carrier frequency)
1 (2.412 GHz)
2 (2.417 GHz)
3 (2.422 GHz)
4 (2.427 GHz)
5 (2.432 GHz)
6 (2.437 GHz)
7 (2.442 GHz)
8 (2.447 GHz)
9 (2.452 GHz)
10 (2.457 GHz)
11 (2.462 GHz)
auto
-- custom --
assigns channel automatically
manually specifies WiFi channel
Normally one of the channels is already selected, and no
change is needed unless there exists interference problems