User's Manual
Table Of Contents
- Package Contents
- Installation
- Using Web-based Management
- Login
- Status
- System
- Services
- Network
- Interfaces
- Hotspot
- Mobile Internet
- WWAN Setting
- Network Settings
- Reset Modem
- Manually Update Phone Number
- Manually Update MSID
- Manually Update MIP Profile
- eHRPD Menu
- Enable LTE
- U/SIM PIN Management
- Scenario 1: No mobile internet service
- Scenario 2: Mobile internet service pending
- Scenario 3: Mobile internet service enabled
- SIM Management
- Scenario 1: SIM lock absent
- Scenario 2: SIM lock present
- Preferred Network
- AT command
- Router
- WiFi
- Switch
- Diagnostics
- Firewall
- UPNP
- VPN
- Help
- Logout
- Appendix A: Vehicle Installation Guide
- Appendix B: FAQ
- Appendix C: Specifications
- Appendix D: Important Safety Information and Glossary
Using Web-based Management
52
auto – (default setting) the system automatically chooses
the optimal encryption protocol
Force CCMP (AES) – Use CCMP (AES) encryption
exclusively (stronger than TKIP)
Force TKIP – Use TKIP encryption exclusively
Force TKIP and CCMP (AES) – Use TKIP and CCMP
(AES) encryption protocols together
Radius-Authentication-Server: Enter the name of the RADIUS
authentication server.
Radius-Authentication-Port: E nter the port number of the RADIUS
authentication port (the default port number is 1812).
Radius-Authentication-Secret: Enter the desired RADIUS secret
password.
MAC-Filter
MAC-Address Filter:
This tab item allows you to selectively allow or block clients from network
access. Click
and select an option from the drop-down list:
1. Disable – The MAC address filter is disabled (default option).
2. White list* – Click
and select a desired MAC address from the
drop-down list, or select “-- custom --" and enter a specific client’s
MAC address.
3. Black list* – Click
and select an undesired MAC address from
the drop-down list, or select “-- custom --" and enter a specific
client’s MAC address.
* To add another MAC address to the list, click
to add a new
drop-down list; then repeat the MAC address selection/specification.
To remove a MAC address from the list, click
.