User's Manual
Table Of Contents
- Package Contents
- Installation
- Using Web-based Management
- Login
- Status
- System
- Services
- Network
- Interfaces
- Hotspot
- Mobile Internet
- WWAN Setting
- Network Settings
- Reset Modem
- Manually Update Phone Number
- Manually Update MSID
- Manually Update MIP Profile
- eHRPD Menu
- Enable LTE
- U/SIM PIN Management
- Scenario 1: No mobile internet service
- Scenario 2: Mobile internet service pending
- Scenario 3: Mobile internet service enabled
- SIM Management
- Scenario 1: SIM lock absent
- Scenario 2: SIM lock present
- Preferred Network
- AT command
- Router
- WiFi
- Switch
- Diagnostics
- Firewall
- UPNP
- VPN
- Help
- Logout
- Appendix A: Vehicle Installation Guide
- Appendix B: FAQ
- Appendix C: Specifications
- Appendix D: Important Safety Information and Glossary
Using Web-based Management
66
Note:
Numerical and text values shown in the illustrative examples are for
demonstration purposes only and are not for actual operation.
Port Range Forward
Port Range Forward
Port Range Forward allows you to set up public services on your network,
such as web servers, ftp servers, e-mail servers, and other specialized
Internet applications.
To forward a port range:
1. Name: Enter an application name for this port range forwarding
rule.
2. Protocol: Click
and select a protocol from the drop down list –
TCP+UDP (default), TCP, UDP, or Other…
3. Port Range Forward: Specify the range of port forwarding by
entering the Start Port number and the End Port number.
4. IP address: Enter the IP address of the PC running the specific
application.