User's Manual
Table Of Contents
- Package Contents
- Installation
- Using Web-based Management
- Login
- Status
- System
- Services
- Network
- Interfaces
- Hotspot
- Mobile Internet
- WWAN Setting
- Network Settings
- Reset Modem
- Manually Update Phone Number
- Manually Update MSID
- Manually Update MIP Profile
- eHRPD Menu
- Enable LTE
- U/SIM PIN Management
- Scenario 1: No mobile internet service
- Scenario 2: Mobile internet service pending
- Scenario 3: Mobile internet service enabled
- SIM Management
- Scenario 1: SIM lock absent
- Scenario 2: SIM lock present
- Preferred Network
- AT command
- Router
- WiFi
- Switch
- Diagnostics
- Firewall
- UPNP
- VPN
- Help
- Logout
- Appendix A: Vehicle Installation Guide
- Appendix B: FAQ
- Appendix C: Specifications
- Appendix D: Important Safety Information and Glossary
Appendix A: Vehicle Installation Guide
76
a poorly ventilated spot that is either near the engine or is prone to direct
sunlight.
Basic Power Management
In this type of installation, voltage is regulated solely on the power
management block, which routes battery power to the ignition switch
during engine startup while rendering conditioned output DC power to the
vehicle’s electrical parts. First connect the long red positive power cable
to the input of the power management block. Then connect the
conditioned positive power output to your K530. On the ground side,
connect the ground from your K530 to the ground of the power
management block and the ground of the battery.