User's Manual
Table Of Contents
- Table of Contents
- Package Contents
- Installation
- Wizard Setup
- Internet Setup
- Router Setup
- WiFi Setup
- Basic WiFi Network
- Basic WiFi Network
- Open System
- WEP: The Router supports two WEP (Wired Equivalent Privacy) standards: 64-bit and 128-bit. Select a standard from the drop-down list. The 64-bits encryption requires 10 hexadecimal digits (letters a-f and numbers 0-9 are valid). The 128-bits encryptio...
- 802.1x
- WPA2
- WPA PSK
- WPA2 PSK
- WPA - WPA2 - Mixed PSK
- Basic WiFi Network
- Basic WiFi Network
- 4G LTE Setup
- Security Setup
- Status
- Telephony
- Appendix A: FAQ
- Appendix B: Specification
- Appendix C: Important Safety Information and Glossary
Installation
8
4. One of the following two methods can be chosen to link your Router
with a PC.
A. To link the Router with your PC via Wi-Fi, in Microsoft Windows, go
to Control Panel > Network Connections, right-click on Wireless
Network Connection, and choose View Available Wireless
Networks. Choose the SSID of the Router wireless network, input
the WiFi password if needed and click Connect.
B. To link the Router with your PC via Ethernet cable, connect one end
of the cable to the LAN port on the Router, and the other end of the
cable to the Ethernet port on your computer.
Note: If you choose to access the Internet via Ethernet,
connect one end of the cable to the WAN port of Router, and
the other end to your xDSL/Cable Modem.