User's Manual
Table Of Contents
- Table of Contents
- Package Contents
- Installation
- Wizard Setup
- Internet Setup
- Router Setup
- WiFi Setup
- Basic WiFi Network
- Basic WiFi Network
- Open System
- WEP: The Router supports two WEP (Wired Equivalent Privacy) standards: 64-bit and 128-bit. Select a standard from the drop-down list. The 64-bits encryption requires 10 hexadecimal digits (letters a-f and numbers 0-9 are valid). The 128-bits encryptio...
- 802.1x
- WPA2
- WPA PSK
- WPA2 PSK
- WPA - WPA2 - Mixed PSK
- Basic WiFi Network
- Basic WiFi Network
- 4G LTE Setup
- Security Setup
- Status
- Telephony
- Appendix A: FAQ
- Appendix B: Specification
- Appendix C: Important Safety Information and Glossary
Security Setup
43
Single Port Forward
Single Port Forwarding
Port Forwarding allows you to set up public services on your network,
such as web servers, ftp servers, e-mail servers, and other specialized
Internet applications.
T o forward a single port:
1. Click Add.
2. In the Application field, enter the name of your application.
3. In the Protocol field, select the protocol used for this application:
TCP, UDP, or Both.
4. In the Port (External) field, enter the port number of the external
port used by the server or Internet application.
5. In the Port (Internal) field, enter the port number of the internal port
used by the server or Internet application.
6. In the LAN IP field, enter the IP address of the PC running the
specific application.
7. Activate/deactivate the Enabled checkbox to enable/disable the
client’s DHCP IP reservation.
To apply the changes, click Apply.
To cancel the latest changes without saving the changes, click Undo.
To delete a port forwarding rule, activate the appropriate checkbox in the
Select column and click Del.