Cable Box User Manual

51
When you have connected speakers in a
surround sound setup to the television, you
must perform a speaker calibration.
A calibration sound is produced alternately in
each of the speakers you have connected in
your surround sound setup. Your task is to
adjust the sound level from all the connected
speakers to match the sound level from the
centre speaker. You can choose whether you
want the sound sequence to occur
automatically or manually.
Once you have performed your speaker
calibration, you will only need to re-calibrate
the speaker sound if you make changes to the
setup, for example, if you move one or more
of the speakers.
> Press MENU to bring up the TV SETUP menu
and press
to highlight OPTIONS.
> Press GO to bring up the OPTIONS menu and
press
to highlight SOUND.
> Press GO to bring up the SOUND SETUP menu
and press
to highlight SPEAKER LEVEL.
> Press GO to bring up the SPEAKER LEVEL menu.
SEQUENCE is highlighted.
> Press or to choose between AUTOMATIC
and MANUAL.
> Press
or to adjust the speaker sound and
or to move to another speaker.
> When you have adjusted the sound for all the
speakers in your surround sound setup, press
GO to store or press EXIT to leave the menu
without storing.
The sound level from the television speakers
functions as your point of comparison with the
external speakers and can not be adjusted here.
It is not necessary to calibrate subwoofer sound in
a surround sound setup. If you still wish to adjust
subwoofer sound when your speaker calibration is
complete, refer to the section ‘Sound adjustments’
on page 52.
Calibrate the sound level
SPEAKER LEVEL
store
GO
SEQUENCE AUTOMATIC
LEFT FRONT . . . . . . . .
RIGHT FRONT . . . . . . . .
RIGHT REAR . . . . . . . .
LEFT REAR . . . . . . . .