User's Manual
Table Of Contents
- Before you start…
- Contents
- Get started
- Charge the handset battery
- First-time registration of a handset to a base
- Name the handset
- Set BeoCom 1 for use with one or two lines
- Set the time and date
- Phone feedback – indicator lights
- Connect and use a headset
- Placement and surroundings
- Clean BeoCom 1
- Attach the clip
- The handset display
- Handset keys
- Battery status
- Replace the battery
- Daily use
- 2-line use
- Advanced operations
- System use with several handsets
- Preference settings
- Important information about BeoCom 1
- Index
- For the Canadian market only…
- For the American market only…
- For your information…
44
>> Advanced operations
Call and store extension numbers in the Phonebook
If you need to make a call to an extension number, such as those
used by banks and other large businesses with switchboards, a
pause must be inserted before the extension number. Store the
main number, the pause and the extension number in the
Phonebook. You can then call the number from the Phonebook.
To call an extension number directly…
Enter the main telephone number
Press to make the call. Wait for a connection
Enter the extension number
Press to end the call
To store an extension number in the Phonebook…
Enter the main telephone number
Press to be able to insert a pause
Turn the wheel until Insert pause? appears in the
display and press OK
Turn the wheel to select a pause length and
press OK. You can select a pause length of one
to nine seconds, or select Wait?. Refer to the
following page for further information
0 – 9
0 – 9
0 – 9
1:5551212
OK
1:5551212
s
Enter name?
t
1:5551212
s
Insert pause?
t
OK
1:5551212
s
3 seconds?
t
OK