User's Manual
Table Of Contents
- Before you start…
- Contents
- Get started
- Charge the handset battery
- First-time registration of a handset to a base
- Name the handset
- Set BeoCom 1 for use with one or two lines
- Set the time and date
- Phone feedback – indicator lights
- Connect and use a headset
- Placement and surroundings
- Clean BeoCom 1
- Attach the clip
- The handset display
- Handset keys
- Battery status
- Replace the battery
- Daily use
- 2-line use
- Advanced operations
- System use with several handsets
- Preference settings
- Important information about BeoCom 1
- Index
- For the Canadian market only…
- For the American market only…
- For your information…
50
>> System use with several handsets
Forward external calls
You can forward an external call to one handset or to all handsets.
You can speak with the person answering the internal handset
before forwarding the call. When you forward an external call to
all handsets, the call goes to the handset which answers first.
Forward an external call…
Press to make an internal call
Press the number of the handset and the call is
made automatically. Alternatively…
…turn the wheel to search through the internal
listing of handsets and press to make the call.
If the internal call can not be made, you will hear
a busy signal
If the internal call is answered…
You can transfer the call, start a conference call,
or retrieve the external call
Turn the wheel to display either Forward?,
Conference?, or Retrieve?
Press OK to enter your choice
Retrieve the external call if the internal call is not answered…
Press to retrieve the external call on hold. You
can also press
INT
1 – 8
Living room
3
OK
s
Forward?
t
OK
If you have an active call and
another handset elsewhere in the
system is taken off the hook, your
handset emits a single, short beep
to notify you that a third party has
joined the call. This, however, only
happens if the system handsets are
using the same line at the time.