Table stand Wall bracket BeoPlay S8
3 Wall Table bracketstand BeoPlay S8 Table stand BeoPlay S8 7 Wall Wall bracket BeoPlay S8 bracket 2 Table stand BeoPlay S8
1x A 1x B Y X X Y Z = = = Z 158 mm (6.2") 154 mm (6.0") 116 mm (4.
2 1 2 1 3 ! A 4
4 5 6 click 1 2 5
8 7 B 6
2x A 2x B 1x C 7
W X U V Y U V W X Y Z = = = = = = 74 mm 79 mm 57 mm 102 mm 44 mm 59 mm (2.9") (3.1") (2.2") (4.0") (1.7") (2.
1 A 2 3 B 9
4 5 2 1 6 ! 10
7 8 9 C 11
10 c b a 11 click 12
12 click 1 2 13 13
English Use the correct size and type of screws and wall anchors – taking into account the construction and condition of the wall. Use 4 flat-bottom head screws (ø 4 mm – 0.16") and wall anchors each with a minimum load rating of 3.5 kg (7.7 lbs). Special notice about gypsum and light partition walls If you intend to hang the product on a gypsum wall (also known as drywall or wallboard), the wall bracket must be fastened to a vertical stud. Mounting was evaluated for use on a drywall surface.
Français (French) Utilisez des vis et des chevilles dont la taille et le type sont adaptés au matériau et à l’état du mur. Utilisez 4 vis à tête plate (ø 4 mm – 0.16") et chevilles correspondantes supportant chacune une charge nominale minimale de 3,5 kg (7.7 lbs).
3511359 Version 1.
