BeoRemote One
Contents – Click a headline to move to that section Daily use Introduction to BeoRemote One and the guide, 3 Using your BeoRemote One, 4 BeoRemote One in detail, 5 Access your favourite content using MyButtons, 7 This guide contains additional information about your BeoRemote One and describes features and functions in detail. Among other things you can find information about settings.
Introduction to BeoRemote One and the guide The BeoRemote One is a hand-held remote control which gives easy access to remote operation of your Bang & Olufsen television or music system. The display on BeoRemote shows you sources or functions, such as TV, RADIO and STAND, or even the lights. The BeoRemote One remote control incorporates more functions than just the actual buttons.
Using your BeoRemote One The BeoRemote One display shows you sources and functions. TV HOMEMEDIA Display text in focus If the display text fills up more than one line, the text will scroll in from the right in order to display all text when the text is in focus.
BeoRemote One remote in detail Daily and advanced operation with BeoRemote One buttons The buttons on BeoRemote One are conveniently grouped for daily operation. TV … displays available TV sources in the BeoRemote One display for you to switch on. Use or to step in the list and press the centre button to switch on a source. MUSIC … displays available music sources in the BeoRemote One display for you to switch on. Use or to step in the list and press the centre button to switch on a source.
, , and … arrow buttons left, right, up and down allow you to move in menus and in the BeoRemote One display. Use to return to previous level/item. Use to open a list of Options or make a selection. (Centre button) … allows you to select or activate a menu or item. (Coloured buttons) … allow you to select colour specific functions. It will be explained in the guide for your Bang & Olufsen product when and how to use the buttons. and … search backwards or forwards step by step.
Access your favourite content using MyButtons You can personalise your BeoRemote One, using the three MyButtons. You can save a snapshot of a current television viewing or playback experience to be able to restore it quickly with just one touch of a button. For more information, see the guide for your television. You can also dedicate a source to one of the MyButtons, and use it to switch on the source directly. Note that not all products support the MyButton function.
Make settings for the display BeoRemote One display settings You can change the settings for display time out* 1 and for display brightness* 1 on your BeoRemote One.
Customise your remote control The BeoRemote One distinguishes between two main types of sources for the product you operate. The TV button allows you to access TV sources and the MUSIC button allows you to access music sources. If your products are connected in a BeoLink setup, you can also access linked sources (marked with a link symbol ), if available. For more information about linked sources, see pages 22–24.
>> Customise your remote control Rename sources or functions You can rename the sources to be shown when pressing the TV button and MUSIC button. You can also rename functions for the LIST button dedicated to each source, LIST for MUSIC and LIST for TV. Note, however, that you cannot rename the Settings menu. To rename a source or function*1 for the TV, MUSIC and LIST buttons ...
>> Customise your remote control Move sources or functions You can change the order in which the listed sources appear when pressing the TV button and MUSIC button for the product you operate. You can also move functions for the LIST button dedicated to each source, LIST for MUSIC and LIST for TV. Note, however, that you cannot move the Settings menu, which is always placed at the bottom of the list. To move a source or function*1 for the TV, MUSIC and LIST buttons ...
Maintenance Changing the batteries of BeoRemote One When the battery warning appears in the BeoRemote One display, it is time to change the batteries in the remote control. The BeoRemote One requires two batteries. We recommend that you use 1.5 volt (size AAA) batteries only. Replace the batteries as shown in the Quick guide enclosed with your BeoRemote One or www.bang-olufsen.dk/support/ beo-remoteone.pdf.
Add more products From the factory BeoRemote One is set up for use with a television (BeoVision) only. If you want to use BeoRemote One with a new type of Bang & Olufsen product or if you want to use the same BeoRemote One to operate more than one product, the product must be shown in the BeoRemote One LIST for you to select it.
>> Add more products Step 2 – Set up your product to the correct Option If you use BeoRemote One for a new product or for two or more products of the same type, for example, two televisions and commands from BeoRemote One can be received by both products, BeoRemote One must be able to recognise your products individually. Therefore, you must set up your product to one of the different product Options using the Product Option menu.
>> Add more products Switch between products using BeoRemote One Normally, you can activate a source, such as TV, by pressing TV or MUSIC and finding the relevant source on your remote control. However, when you have more products, you must select the product before you can operate its sources. You switch between the products via LIST.
Using BeoRemote One for a ‘Beo4’ product You can use BeoRemote One for operation of a Master Link television or music system, which is normally operated with Beo4. The product must be shown in the BeoRemote One LIST, to select it. When a ‘Beo4’ product is selected, the BeoRemote One LIST contains the same functions as you find in the Beo4 LIST. However, you cannot select sources via LIST. To find out how to use BeoRemote One if you normally use Beo4, see page 19.
>> Using BeoRemote One for a ‘Beo4’ product Step 2 – Set up your ‘Beo4’ product to the correct Option When you use BeoRemote One for a ‘Beo4’ product, the Product Option menu is adapted to match the Option settings available with your Beo4 remote control. To Option programme a ‘Beo4’ product using BeoRemote One … Point your remote control at the IR-receiver of the product you want to Option programme. The distance between the remote control and the IR-receiver must be maximum 0.5 metres.
>> Using BeoRemote One for a ‘Beo4’ product Set up the MyButtons and the TV or MUSIC button for a specific source When you use BeoRemote One to operate a ‘Beo4’ product, the three MyButtons are dedicated to the buttons corresponding to the DTV, DVD and CD buttons on Beo4. You can change this at any time and select which source you want to activate each time you press one of the three MyButtons. To set up the MyButtons and the TV or MUSIC button for activating a specific source ...
Beo4 and BeoRemote One conversion If you are used to operate your product with Beo4, below conversion helps you find out which button to use on your BeoRemote One when you operate a ‘Beo4’ product. BeoRemote One buttons are marked with blue. The buttons which have exactly the same function on Beo4 and BeoRemote One are light grey. TV HOMEMEDIA TV: … use the TV button on BeoRemote One. This also displays a list of TV sources V.MEM: … Press TV to bring up TV sources and find V.
BeoRemote One advanced settings You have access to make more advanced settings of your BeoRemote One from the Advanced menu. You can, for example, change the display language and you can reset your BeoRemote One to factory settings. You can also,set the IR strength if you use BeoRemote One to operate more than one ‘Beo4’ product. If you use your BeoRemote One for operation of lights, curtains or blinds you can make settings for this in the LIGHT and CONTROL menus.
>> BeoRemote One advanced settings Set the IR strength of BeoRemote One You can set up the IR strength of your BeoRemote One. If, for example, you use BeoRemote One for several ‘Beo4’ products and they are placed in close proximity, you can reduce the IR strength of the remote control. To set the IR strength of BeoRemote One ...
BeoLink setup When you use BeoRemote One for operation of more products and the products are connected to the same network, you can access sound from sources of the other products in the network. The products can be placed in the same or separate rooms. For more information about how to connect and set up your product, see the guide for your television or music system.
>> BeoLink setup Two TVs with Network Link in separate rooms Default product: Default product: BeoVision BeoVision Access In this setup, both Network Link TVs are BeoVision per default. You have the same list of TV and MUSIC sources for both televisions. In the example only the TV sources are shown. linked sources Access YOUTUBE YOUTUBE TV TV HDMI 1 HDMI 1 To show/hide sources of both TVs using BeoRemote One ...
>> BeoLink setup Two TVs with Network Link in the same room (with one BeoRemote One) Access Default product: Product Option: BeoVision BeoVision(2) In this setup, one Network Link TV is BeoVision per default and the other is set up as BeoVision(2). For information about how to set up your product, see page 13. linked sources You have the same list of TV and MUSIC sources for both products BeoVision and BeoVision(2).