BeoSound 3 Bedienungsanleitung
Supported file formats are: – MP3 Sampling frequencies: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, and 48 kHz Constant or variable bit rates: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 256 and 320 Kbps – WMA Sampling frequencies: 22.050, 32, 44.
Inhalt Vorstellung Ihres Musiksystems, 4 Lernen Sie Ihr Musiksystem kennen, machen Sie sich mit den Bedienelementen vertraut, verstehen und ändern Sie die Displayinformationen. Täglicher Betrieb, 7 So benutzen Sie Ihr Musiksystem, spielen Musik von einer eingelegten Speicherkarte ab, hören FM-Radio und lassen Ihr System zu bestimmten Zeiten ein- und ausschalten. Aufstellung, Anschlüsse und Pflege, 12 Platzierung, Anschluss und Reinigung Ihres Musiksystems.
Vorstellung Ihres Musiksystems 4 Das BeoSound 3 ist ein tragbares FM-Radio und ein Speicherkartenplayer für Akkubetrieb. An der Unterseite befinden sich die Netzbuchse zum Akkuladen des Systems, der Speicherkarteneinschub und die Kopfhörerbuchse. Sie können das Gerät an seinem Griff tragen oder an der mitgelieferten Wandhalterung aufhängen. Berühren Sie das Bedienfeld an der Oberseite, um das Radio einzuschalten oder Musik von einer eingelegten SD- bzw. MMC-Speicherkarte abzuspielen.
Das Bedienfeld DELETE Einen FM-Sender bzw. Systemeinstellungen wie einen Wecktimer speichern. Zweimal drücken, um den aktuellen Lautstärkepegel zu speichern. STORE Einen Wecktimer programmieren. TIMER Die eingebaute Antenne ausfahren bzw. einziehen. Achten Sie auf ausreichenden Freiraum für die Antenne über dem System. AERIAL ST OR TI M E ER L DE RIA LE AE TE Einen FM-Sender bzw. Wecktimer löschen. GO EM ST .B Y A.M System in den Standbybetrieb schalten. Im Standbybetrieb ST.
Sie können den Display-Modus jederzeit wechseln. Das System „erinnert” sich an Ihre Einstellungen. – Halten Sie RADIO gedrückt, um zwischen der Anzeige der Sendernummer und -frequenz umzuschalten. – Halten Sie A MEM gedrückt, um bei der Wiedergabe von Speicherkartentiteln zwischen der Anzeige von Quelle/Ordner und Ordner/Titel umzuschalten. >> Vorstellung Ihres Bang & Olufsen Musiksystems Displayinformationen Das Display informiert Sie über die gewählte Quelle und den Systemzustand.
Täglicher Betrieb 7 Radio hören Beim Einschalten des Radios fährt automatisch die Antenne aus, und der zuletzt eingestellte Radiosender wird wiedergegeben. Radio einschalten… > Drücken Sie RADIO, um das Radio einzuschalten. Die Antenne fährt aus, der zuletzt eingestellte Radiosender wird wiedergegeben und die Sendernummer bzw. -frequenz angezeigt. > Mit bzw. wechseln Sie zwischen den Sendern. Halten Sie für schnelles Umschalten bzw. gedrückt.
>> Täglicher Betrieb Die BeoSound 3 unterstützt nur MultiMedia- (MMC) und Secure Digital- (SD) Karten von SanDisk. Titel von einer Speicherkarte abspielen Ihr Audiosystem gibt Musiktitel im MP3- und WMA-Format von Ordnern in der ersten Ebene auf der Speicherkarte wieder. Titel im Root-Verzeichnis oder in Unterordnern werden nicht abgespielt. Sie können über Ihren PC oder bspw. die BeoSound 4 Musik auf eine Speicherkarte kopieren.
Zwischen Ordnern wechseln… > Drücken Sie , um zum ersten Titel im vorigen Ordner zu wechseln. > Drücken Sie , um zum ersten Titel im nächsten Ordner zu wechseln. Einen Musiktitel durchsuchen… > Halten Sie bzw. gedrückt, um einen Titel zu durchsuchen. Das Durchsuchen erfolgt ohne Tonwiedergabe. Hierbei zeigt das Display die verstrichene Zeit im Titel. > Drücken Sie GO bzw. A MEM, um weiter abzuspielen. Zufallswiedergabe… > Drücken Sie in schneller Folge A MEM und dann STORE.
>> Täglicher Betrieb Wecktimer programmieren Ein programmierter Wecktimer wird jeweils nur einmal ausgeführt und muss dann bei Bedarf neu programmiert werden. > Während das System im Standbybetrieb ist, drücken Sie TIMER. Die zuletzt gewählte Weckzeit erscheint im Display. Ihre Ziffern blinken. > Drücken Sie bzw. , um die Zeit zu wählen, zu der das System einschalten soll. Halten Sie bzw. gedrückt, um den Uhrzeitdurchlauf zu beschleunigen.
Ausschalttimer programmieren Sie können in 15-Minuten-Schritten einstellen, wie lange das Radio spielen soll, bevor das System in den Standbybetrieb schaltet. Sie können auf Speicherkartenwiedergabe bzw. in den Standbybetrieb umschalten, bevor der Ausschalttimer aktiviert wird. Der Stop Timer wird dadurch deaktiviert. > Drücken Sie RADIO, um das Radio einzuschalten. > Drücken Sie STOP, um den Ausschalttimer zu löschen. Das Display zeigt die Minuten, bevor das Radio in den Standbybetrieb schaltet.
Aufstellung, Anschlüsse und Pflege 12 Platzierung Ihr Musiksystem wurde nur für den Gebrauch in trockenen Wohnräumen innerhalb eines Temperaturbereichs von 10–40˚ C bei einer relativen Feuchte von 25–75% konstruiert. Achten Sie stets darauf, dass das System auf einer festen und stabilen Oberfläche platziert wird, wenn es nicht an der mitgelieferten Wandhalterung hängt. Setzen Sie das System keinem direkten Sonnenlicht aus und stellen Sie es nicht in die Nähe von Heizkörpern bzw. anderen Wärmequellen.
Kopfhörer anschließen Sie können Kopfhörer an die Buchse unten am System anschließen. Bei angeschlossenen Kopfhörern ist der Lautsprecher stummgeschaltet. Akku laden Schließen Sie das System wie gezeigt an das Netz an, um den Akku zu laden. Während des Ladevorgangs blinkt die Standbyanzeige im Display langsam. Auf S. 4 finden Sie weitere Informationen zur Standbyanzeige. – Das vollständige Aufladen des Akkus dauert im Standbybetrieb zweieinhalb Stunden und im Systembetrieb bis zu zehn Stunden.
Senderabstimmung und bevorzugte Einstellungen Radiosender abstimmen > Drücken Sie RADIO, um das Radio einzuschalten. > Drücken Sie bzw. , um den Sendersuchlauf zu starten. Wenn Sie erstmals Radiosender abstimmen, können Sie zum Suchlaufstart auch bzw. drücken. > Wenn ein Sender gefunden wird, zeigt das Display seine Frequenz. > Drücken Sie STORE, um einen Sender zu speichern. Die erste freie Sendernummer blinkt im Display. > Drücken Sie bzw. , um die Sendernummer ggf. zu ändern.
Einen Sender löschen > Drücken Sie RADIO, um das Radio einzuschalten. > Drücken Sie bzw. , um den zu löschenden Sender zu wählen. > Drücken Sie zweimal DELETE, um den Sender zu löschen. Das Display blinkt, und das Radio wechselt zur nächsten Sendernummer. Eingebaute Uhr einstellen > Während das System im Standbybetrieb ist, halten Sie ST.BY gedrückt, bis die Uhrzeit im Display blinkt. Wenn die Uhrzeit noch nicht eingestellt wurde, zeigt das Display „- -.- -“ statt Ziffern. > Drücken Sie bzw.
Zu Ihrer Information… Ihren Ansprüchen als Anwender wird während des Konstruktions- und Entwicklungsprozesses eines Produkts von Bang & Olufsen besondere Beachtung geschenkt. Wir unternehmen alles, um die Bedienung unserer Produkte einfach und komfortabel zu gestalten. Wir hoffen daher, dass Sie sich die Zeit nehmen können, uns Ihre Erfahrungen mit Ihrem Bang & Olufsen Produkt mitzuteilen.
Elektro- und Elektronikschrott (WEEE) Umweltschutz Das Europäische Parlament und der Rat der Europäischen Union haben die EU-WEEE-Richtlinie („Elektroschrottverordnung“) verabschiedet. Die Richtlinie verfolgt das Ziel, Elektro- und Elektronikschrott zu vermeiden und die Wiederverwendung bzw. -verwertung sowie andere Formen der Rückgewinnung derartiger Abfälle zu fördern. Somit betrifft die Richtlinie Hersteller, Händler und Verbraucher.
Dieses Produkt erfüllt die Vorschriften der EWGRichtlinien 89/336 und 73/23.
www.bang-olufsen.