BeoSound 9000 Guide
Contents of the Guide To get to know your Bang & Olufsen product, two guides are at your disposal. The Guide BeoVision Avant BeoVision Avant Guide Reference book Your key to using BeoSound 9000 4 Principles of operation 5 Buttons on the operation panel The Reference book Using the CD player The Guide provides information on daily use. The Reference book gives a thorough overview of all aspects. To the right, you find the contents of this Guide.
Your key to using BeoSound 9000 The BeoSound 9000 contains 6 Compact Disc compartments and a carriage moves between compartments enabling CD playback. Move the carriage by pressing the direct CD selection button next to the CD compartment. When you switch the BeoSound 9000 to stand-by, the carriage will always situate itself next to the operation panel and the CD compartment number 1. Load button The load button is situated in a low position on the BeoSound 9000. NAMING CLEAR TUNE P. NO.
Buttons on the operation panel The buttons on the operation panel are conveniently grouped according to type of function, so you can easily find your way around the panel while operating the system. A. AUX function. The button enables you to switch on extra audio equipment. Stand-by function. The button switches BeoSound 9000 to stand by. TREBLE BASS RESET TIMER MUTE CHECK OK ON/OFF RANDOM CD TUNE PAUSE AM/FM SELECT EDITING P. NO.
Using the CD player 6 When you have loaded your BeoSound 9000 with 1–6 CDs, you are ready to start playing your CDs. When you press the CD button to start playing, all information about the CDs will be registered, e.g. the number of tracks. All loaded CDs are then played. You can change between the different CDs and the individual tracks, to achieve the sequence of tracks you prefer. You can also play CDs and tracks on individual CDs in a random order, using the random function.
CD playback Playing tracks in random order Start playback of a CD by pressing the OK button in the CD section of buttons. If you want to play a specific CD, simply press the direct CD selection button* placed next to the CD compartment. If you select the random play function you will find that the tracks are played in a different order each time the CDs or track series are played.
>> Using the CD player You can make BeoSound 9000 play your favourite CDs in a particular sequence. Every time a CD is included in the sequence, the red indicator next to the CD compartment lights up. If you want to, you can override the chosen disc sequence and listen to a CD not included in the sequence. Press the direct CD selection button next to the CD you want to hear, and playback will start immediately.
Using the radio To listen to the radio, you must first find and store the frequencies of the radio stations. You can store up to 60 different radio stations in your BeoSound 9000 (refer to the Reference book for further information). Switch on the radio When you switch on the radio, it automatically selects the station which you last listened to, indicating on the display which radio program is playing.
Adjust the volume 10 If you store a volume level, BeoSound 9000 will start playing at this level each time you switch it on. Please refer to Adjust and store sound settings in the Reference book for further information about adjusting and storing volume levels. Adjust the sound volume While you are listening to the radio or CD player, you can of course adjust the sound volume, at any time. VOL r VOL u Adjust the volume up or down MUTE Silences the speakers immediately.
www.bang-olufsen.