Version 1.
Advanced settings 61 Factory settings 62 Reinstall your television 63 Region and language 64 Make region and language settings 64 Languages 64 Time and date 65 Universal access 67 Universal access – introduction 67 Universal access 67 Hearing impaired 67 Audio description 67 Child lock 68 Set up a child lock 68 Parental rating 68 App lock 68 Set an access code 68 Change your access code 69 Network and Bluetooth settings 70 Make network and Bluetooth settings 70 Wired or wireless 70 Configure your networ
Dear customer This guide contains additional information about the daily use of your Bang & Olufsen product and connected products, and describes the features and functions of your product in more detail. Among other things you can find information about settings, how to operate your product with a Bang & Olufsen remote control, and how to set up a wired or wireless connection. We expect your retailer to deliver, install and set up your product.
Remote control How to use your remote control In this guide, operation is described with BeoRemote One. Note that to operate your television, it must first be paired with BeoRemote One. Your television enters pairing mode as soon as you connect it to the mains. For information on how to enable pairing of BeoRemote One, see the guide for your remote control, www.bangolufsen.com/guides/beoremoteonebt. Also, press the red button in the on-screen help and find 'Bluetooth' for more about pairing.
, , and Arrow buttons left, right, up and down. Move in menus and in the BeoRemote One display. (Centre button) For selecting and activating, for example, settings. , , and (Colour buttons) Select colour specific functions. Start playback of a track, file or recording or start replay. and Search backwards or forwards step by step. and Step through channels and stations. Pause playback of a programme or recording. and Adjust volume. To mute, press the middle of the button.
Basic operation Guides Together with your television you have received a printed Quick guide introducing you to the television. The present guide found on-screen and online provides you with a deeper knowledge about the television and its many features and functions. It is also referred to as onscreen help. Menu operation The below shows an example of a menu operation. Settings Sound ... This menu hierarchy illustrates the path into a menu where you can make different settings.
To bring up a list of options related to the active source, you can press LIST, then or to bring up Options in the BeoRemote One display and press the centre button. How to navigate in menus Navigate in menus and select settings using your remote control. Pressing brings up a Home menu, which gives an overview of available apps and different features. Navigate in menus... When a menu is on the screen, you can move between menu options, reveal settings or enter data. 1.
For information on how to activate a source directly with the TV or MUSIC button, see the guide for BeoRemote One. Save a snapshot You can save snapshots which can be activated by the MyButtons, the TV button and the MUSIC button. Your television must be switched on and a source must be selected. 1. Press and hold one of the MyButtons, the TV or the MUSIC button to bring up a list of items you can include in the snapshot. 2.
If the television is connected to the Internet, you can use the search field in the Home menu. You can enter text for a precise search for a song, a TV programme, a YouTube video or anything you like on the Internet. Use to move to the microphone icon and press to move to the search field. Use the on-screen keyboard to enter text and the centre button. The results of your search appear after a few seconds. Move or to view the different types of content you found.
Set up your television Set up your television - introduction The television has several placement options. Guidelines for placement and connection must be followed. To ensure proper ventilation, allow enough space around the screen. At overheating (flashing standby indicator and an on-screen warning), switch the television to standby, do not disconnect from the mains, in order for the television to cool down. You cannot operate the television during this time.
Set the maximum angle the television will turn on the motorised floor stand or wall bracket. The wall bracket without a motor can manually be turned 90˚ left or right depending on your setup. Remember to leave enough space around the television to allow it to turn freely. For more information, press the red button in the on-screen help and find 'Set a stand position'. Overview Locate the connection panel and other important items: 1. Holes for mounting of a wall bracket. 2. Holes for mounting of a stand.
therefore colour and form may change over time. Also, note that cloth covers of bright colours may be discoloured over time.
Maintenance Regular maintenance, such as cleaning, is the responsibility of the user. Never use alcohol or other solvents to clean any parts of the television. Screen Use a mild window cleaning fluid and lightly clean the screen without leaving streaks or traces. Some micro-fibre cloths may harm the optical coating due to their strong abrasive effect. Cabinet and controls Wipe dust off the surfaces using a dry, soft cloth.
Connections Connection of products The connection panel on your television allows you to connect signal input cables as well as a variety of extra products, such as a Blu-ray player or a music system. Products you connect to these sockets can be registered in the Source list menu. For more information, press the red button in the on-screen help and find 'Set up connected products'. The illustration shows an example of connections to the AERIAL, SAT 1-2 and PL1-4 sockets.
Connection panels Products you connect permanently to the connection panel can be registered in the Source list menu by pressing for each source. For more information, press the red button in the on-screen help and find 'Set up a source'. We recommend that you connect the television to the Internet to use Smart TV functions, receive software updates and to download Peripheral Unit Controller (PUC) tables.
L/R IN Left and right line input. HDMI IN 1-2 The High Definition Multimedia Interface allows you to connect many different sources, such as set-top boxes, multimedia players, Blu-ray players, or a PC. USB () For connection of a USB device to browse digital photos, video or music files. If you connect a USB HDD or SSD, you can use it as an external hard disk recorder. AERIAL Aerial input socket for a digital aerial/cable TV network or for an analogue TV signal.
setting. You can change this setting temporarily in the Picture menu. Press the red button in the on-screen help and find 'Picture settings' for more information. Connect a camera 1. Connect the cable to the appropriate socket on the camera. 2. Run the cable to an HDMI IN socket on the television. 3. Follow on-screen instructions to configure the source. Connect a computer Before you connect a computer, you must disconnect the television, the computer and all connected products from the mains supply. 1.
For information about download of Peripheral Unit Controller (PUC) tables for set-top boxes, press the red button in the on-screen help and find 'PUC tables'. Smart Card for digital channels If you want to watch coded channels, contact your service provider. The service provider will register you as an authorised viewer, usually requiring payment. You will then be provided with a Smart Card and a CA Module.
If you want to connect two speakers to one PL socket on the television and it is not possible to loop the cable between the speakers, an extra splitter is needed, contact your Bang & Olufsen retailer for more information.
Set up connected products Set up a source If you connect additional video products to your television, you can set up the products in the Source list menu via the Settings option when you find the source and press . When the television is switched on and you connect additional products to an HDMI IN socket, the television will detect an unconfigured source. A message appears on the screen and you can follow on-screen instructions to configure the source.
If you have selected Manual setup, you must select a control type. To operate non-Bang & Olufsen products with a Bang & Olufsen remote control, attach a Bang & Olufsen IR-transmitter to the products. Select IR-blaster if the IR-transmission takes place via an IR-blaster. Select Plug if the IR-transmission takes place via a cable plugged into the product. Modulation mode If you have selected Manual setup, and set the control type to Plug, you must select a modulation mode.
Speaker group Select the speaker group to be used with this source. For more information about setting up speaker groups, press the red button in the onscreen help and find 'Sound settings'. Picture off Select whether the picture on the TV screen should switch off when you select an audio source. Options are Timeout for the picture to switch off when a source has not been operated for a while, Never for the picture to remain on and Always for the picture to be switched off as soon as you select the source.
Picture corrections You can make brightness and contrast corrections as well as shift and zoom the picture horizontally and vertically on the TV screen to avoid any unwanted areas being visible on the screen. The options available depends on the source selected. Auto selection If available for the connected source, select if the source should be selected automatically as soon as the television detects a signal, provided the television is on at the time.
Stand settings Set up the stand If your television is equipped with the optional motorised floor stand or wall bracket, you can turn it using the remote control. Furthermore, you can set the television to turn automatically to face your favourite viewing position when you switch it on. It can turn to a different position when you listen to, for example, a connected radio, and turn away to a standby position when you switch it off.
The calibration process allows you to set the maximum angle the television will turn – left and right. Set up the television with a motorised floor stand 1. In the Stand adjustment menu, use and to turn the television to the leftmost position. 2. Press the centre button to proceed to the next step. 3. Use and to turn the television to the rightmost position. 4. Highlight Save and press the centre button. If your television has just been moved, you will also be asked to set up new stand positions.
Daily use Watch television Watch analogue and digital terrestrial, cable and satellite channels depending on your tuner options. See programme information and turn the television. Make a recording if you have connected a correctly formatted USB HDD or SSD. Learn more about programme information and TV guide in this chapter. To bring up a favourite source quickly, you can save the source on one of the MyButtons on BeoRemote One.
2. 3. 4. 5. press the centre button. Press or to step up or down in pages. Use the number buttons to enter a page number. Use the arrow buttons to navigate. Press to leave teletext. For more information about teletext, press the red button in the on-screen help and find 'Teletext'. Programme information You can bring up information on the current programme, or bring up a TV guide. You can also change audio and subtitle language or bring up interactive information via HbbTV.
you can set reminders or schedule a recording on a selected programme. For more information on recording, press the red button in the on-screen help and find 'Record a programme'. Set a reminder You can set a reminder for a programme. A message will alert you at the start of the programme. You can switch to this channel immediately. In the TV guide, a programme with a reminder is marked with a icon. When the TV guide is on-screen select an upcoming programme.
Turn the television Turn your television. 1. Press LIST, then or to bring up STAND in the BeoRemote One display and press the centre button. 2. Press or to turn the television, or ... 3. ... press or to highlight a position for the television to turn to and press the centre button. To use the motorised floor stand or wall bracket function, you have to calibrate the floor stand or wall bracket first. For more, press the red button in the on-screen help and find 'Stand settings'.
Next to the list with all channels for each tuner, antenna/cable or satellite tuner, you can select a filtered list or you can select one of the favourite lists you have created. To open the current channel list… 1. When the desired tuner is selected, press the centre button to bring up the current channel list, or... 2. ...press GUIDE, then . 3. Press to leave the channel list. To select one of the channel lists… 1.
Lock a channel To prevent children from watching a channel, you can lock it. To watch a locked channel, you must enter the four-digit access code first. You cannot lock programmes from connected devices. When the desired channel list is on-screen, select a channel you want to lock or unlock. You can then lock or unlock the channel via the Options menu found under LIST on the remote control. A locked channel is marked with a icon.
You cannot activate MHEG or HbbTV during timeshift mode. Pause a programme 1. To pause a programme, press . A progress bar at the bottom of the screen appears briefly. 2. To bring up the progress bar, press again. You can pause a programme for a maximum time span of 90 minutes. Replay a programme Resume a programme you have paused after a while. 1.
You can view and manage your recordings in the list of recordings. Next to the list of recordings, there is a separate list for scheduled recordings and reminders. 1. Press TV, then or to bring up Recordings. 2. Press the centre button to bring up the list of recordings. 3. Highlight the tabs New, Watched or Expiring and press the centre button to filter your view. 4. When a recording is highlighted, you can remove an existing recording or stop an ongoing recording if you press the red button.
1. 2. 3. 4. 5. 6. 7. 8. 9. Press TV, then or to bring up Recordings. Press the centre button to bring up the list of recordings. Press LIST, then or to bring up Options in the BeoRemote One display. Press the centre button to bring up the Options menu on the TV screen. Highlight Schedule and press the centre button. Highlight the tuner from where you want to record and press the centre button. Highlight the channel to record from and press the centre button.
In Options in the LIST menu, you can choose to either start playback or play back a highlighted recording from the beginning. You can also resume a recording from where you left off, or remove a recording. In addition, you can press the red button to remove a recording or a scheduled recording. Press the green button to adjust the time of a recording or scheduled recording. In the list of recordings, use the yellow button to rename a recording.
See two sources at the same time With Multi View, you can watch a second programme or source in a small screen. To open the Multi View screen… 1. Switch to a TV channel. If you are not watching TV channels, press TV and select the television source. 2. Press LIST, then or to bring up Multi View and press the centre button to open the small screen. 3. Press or to switch to another channel in the large screen, or... 4. ...press TV and use , and the centre button to select another source. 5.
2. Press or to highlight a page number and press the centre button to open the page. You can clear the list with the option Clear favourite pages found when you press LIST and bring up Options. Search teletext You can highlight a word and scan teletext for all occurences of this word. 1. Open a teletext page and press the centre button. 2. Highlight a word or number with the arrow buttons. 3. Press the centre button again to move immediately to the next occurence of this word or number. 4.
help and find 'Download PUC tables'. For instruction in the various functions offered by your product, see the product’s own guide. Some features and functions of the television may not be available when non-Bang & Olufsen products are connected. Not all connected video products are supported by Bang & Olufsen. For more information about supported products, contact your Bang & Olufsen retailer.
When installed, the icon of the app will appear on the Apps shelf. Apps installed from the App Gallery open automatically after installation. If you have trouble installing apps, first check the settings in the Google Play Store. Lock apps Lock apps unsuited for children. 18+ rated apps You can lock 18+ rated apps from the App Gallery. The 18+ app lock will ask for an access code when you try to start an 18+ rated app.
Music and video services Access services such as Spotify, Deezer and TuneIn, if you have the required subscriptions, and search through and stream for every occasion. Access YouTube to watch a variety of different video content, such as movie and TV clips, music videos, short videos and other content uploaded by users. To use music or video services, your television must be connected to the Internet. Press the red button in the on-screen help and find 'Connect to a network'.
Options on Internet Additional options are available for the Internet. 1. With the Internet app open, press LIST, then or to bring up Options in the BeoRemote One display. 2. Press the centre button to bring up the Options menu on the TV screen. 3. Select one of the items and press the centre button. 4. Press to leave the menu. Voice and search You can search for videos, music or anything else on the Internet by simply using your voice. Alternatively, you can use an on-screen keyboard to enter text.
HomeMedia HomeMedia – introduction You can play music and video files and browse photos stored either on a storage device or in another product connected via a DLNA/UPnP enabled media server. You get access to the files when you connect a storage device to your television. Press TV or MUSIC and highlight the source name dedicated to HomeMedia, for example, HomeMedia then press the centre button.
the online cloud.* With the Cloud Explorer app, you can connect to Cloud Hosting Services. You must use your login and password to connect if required. 1. 2. 3. 4. 5. Press, highlight the Cloud Explorer app and press the centre button. Select the hosting service you need. Connect and sign in to the hosting service with your login and password. Highlight the photo or video you want to play and press the centre button. Press to leave the menu. *An example of a storage service is Dropbox™.
You must start the music before you start the slide show. 1. 2. 3. 4. Select a track or a folder with tracks and press the centre button. Press INFO to hide file info and progress bar. Press . Use the arrow buttons to highlight the desired folder with photos and press the centre button. 5. Press the red button to start a slide show. 6. To stop the slide show, press and hold or press the centre button, then .
Apps with Google Cast Some Google Play products and features are only available on some markets. Find more information on www.support.google.com/androidtv. Cast an app to your TV screen 1. 2. 3. 4. On your smartphone or tablet, open an app that supports Google Cast. Tab the Google Cast icon. Select the television you would like to cast to. Press play on your smartphone or tablet. What you have selected should start playing on the television.
Settings menu Make all types of settings for your product, for example you tell the television what is connected, how to activate connected equipment, you adjust picture and sound settings and much more. Settings ...
Picture settings Adjust picture settings Picture settings such as contrast, brightness, colour, and viewing distance are preset from the factory to neutral values which suit most types of programmes. However, if you wish, you can adjust these settings to your liking. Activate different picture modes, for example, game mode if you connect a game console to your television. Adjust the picture settings via the Picture menu. Settings Picture ...
Backlight Press or to decrease or increase backlight intensity of the TV screen. Contrast enhancement Press or to decrease or increase the contrast enhancement. This contrast enhancement control adjusts a combination of adaptive contrast, adaptive black and backlight dimming. Sharpness Press or to decrease or increase picture sharpness. Too much sharpness will make the picture grainy and unnatural. Noise reduction Press or to decrease or increase noise reduction.
On: Enables the television to measure the intensity of the surrounding light and adapt the contrast of the picture accordingly. Viewing distance Enter the distance from your viewing position, for example, your armchair or sofa, to the screen. You can enter the distance manually or follow the sound settings. Follow sound setting: The distance is set according to the distance set for an enabled built-in speaker and it changes dynamically depending on the selected speaker group.
Sound settings Loudspeaker setup – surround sound Add BeoLab speakers and subwoofers to your television wired or wirelessly and you can have a surround sound system which fits easily into your living room. You get the best sound experience in the area bounded by the speakers. When you connect additional speakers to your television, wired speakers are automatically detected by the television. Wireless speakers must be scanned first for the television to detect them.
Bass management When switched on, the low frequency content in the audio signal may be re-routed to different loudspeakers, depending on their capabilities. Bass management redirects low frequencies to the most capable loudspeakers in your current setup. For example, if you have two small loudspeakers and a subwoofer, the low frequency signals will be directed to your subwoofer instead of to your smaller main speakers.
Loudness boost The loudness function increases the level of the low- and high-frequency content as the volume level is decreased. The maximum amount of level increase in bass and treble can be set under Bass max and treble max. Note that Loudness boost will only have effect if Loudness in the Sound menu is activated. Spatial control The spatial control function allows you to adjust many aspects of the perceived sound, including surround settings, stage width, envelopment and more.
Clip proctection: Each of the audio signal paths also has a peak limiter protecting its outputs to ensure that the speaker signals are not clipped at high listening levels. Disabling these peak limiters under Clip protection allow highlevel signal to pass unmodified to the DAC. However, if set to off, some output signals are clipped and distortion heard, therefore, clip protection should be left on. Reset a sound mode Reset sound settings for the selected sound mode to the default settings.
preferred settings. To rename a speaker group, press the yellow button and follow on-screen instructions. To delete a speaker group, press the red button in the menu and follow on-screen instructions. You cannot rename or delete the Start-up speaker group. To activate a speaker group, press LIST on the remote control, select Speaker and then the desired group.
Bass management When switched on, the low frequency content in the audio signal may be re-routed to different loudspeakers, depending on their capabilities. Bass management redirects low frequencies to the most capable loudspeakers in your current setup. For example, if you have two small loudspeakers and a subwoofer, the low frequency signals will be directed to your subwoofer instead of to your smaller main speakers.
Bass and treble In the Bass and treble menu, decrease or increase the bass level and the treble level. Activate loudness The human ear is less sensitive to low frequencies when they are played at low volume levels. In other words, when you lower the volume, the less bass you can hear. The Loudness function counteracts this effect. As you reduce the volume, the bass and treble levels are automatically increased to compensate for your reduced perception in the outer frequency bands.
Disassociate a speaker from the television … 1. Press or to select a wireless speaker in the Speaker connections menu. 2. Press or to select the Disconnect option. 3. Highlight Yes and press the centre button to disassociate the speaker. If the state of a speaker is missing in the Speaker connections menu, shown by a triangular symbol with an exclamation mark, the speaker has been associated with a wireless channel, and will automatically be detected again when possible.
General settings Make general settings In the General settings menu, you can make settings for general features and functions, such as for a USB keyboard, the pin code system, Switch Off Timers and factory settings. USB hard drive You can connect a USB hard drive to your television and browse the contents of supported formats. If you wish to use a USB hard drive as a hard disk recorder or to download apps, you must connect and set up a USB HDD (Hard Disk Drive) or SSD (Solid State Drive).
Set up a USB keyboard Connect a USB keyboard to a USB socket on the television and follow on-screen instructions to set it up. You can also enter the USB keyboard settings menu to set it up. Settings General settings USB keyboard settings ... Pin code system Pin code system – introduction The pin code system is intended to make normal use of your television impossible for someone who does not know the pin code. You choose whether or not to activate the pin code system.
enter the code and press the centre button to confirm. 3. If you select Off, enter your four-digit pin code and press the centre button to save. If you inadvertently press a wrong button while entering a code, press the yellow button to delete a digit or press the red button to clear an input field. Change your pin code You can change your pin code at all times. If the pin code system is already activated, you are prompted to enter your pin code when you bring up the Pin code menu. Change the pin code ...
TV guide In the TV guide menu, you can select whether you want programme information in the TV guide to be downloaded from the Internet or received from the broadcaster. The default setting for receiving information is From the broadcaster. If the television is connected to the Internet, you can set it to receive the TV guide information from the Internet. If TV guide information comes from the Internet, the TV guide can also list analogue channels next to the digital channels.
Reinstall your television To reinstall your television, follow on-screen instructions. After a reinstallation of your television, it starts up in first-time setup. If you, for some reason, need to change country setting in the television, you must reinstall your television and go through first-time setup again. Important! If you reinstall your television, the content on a connected hard disk drive will no longer be accessible. Settings General settings Reinstall TV ...
Region and language Make region and language settings Make settings for language, time and date. If you for some reason need to change country setting in the television, you must reinstall your television and go through first-time setup again. Press the red button in the onscreen help and find 'Reinstall your television'. Languages Set up a language Select a language to be used for the menu, audio languages and languages for subtitles and teletext. Settings Region and language Languages ...
Set a primary teletext language In the Primary text menu, select your preferred teletext language to be used if available from the programme provider. Set a secondary teletext language In the Secondary text menu, select the teletext language to be used if your first choice is not available. Time and date Time and date – introduction In the Clock menu, you can set the time, date and time zone, and select how you want daylight saving time to be activated and deactivated.
To activate the Sleep Timer via the remote control … This function may not be available in the current software version. 1. Press LIST, then or to bring up Sleep in the BeoRemote One display, then press . 2. Press or to highlight the desired number of minutes or Off then press the centre button.
Universal access Universal access – introduction For hearing and visually impaired, the television can describe audible and visual elements by means of sound and subtitles when provided by the broadcaster. Settings Universal access ... Universal access Activate or deactivate the accessibility features. When Universal access is switched on, the option is added in the Options menu brought up when you press LIST and select Options.
Child lock Set up a child lock The Child lock menu allows you to activate a child lock system to determine which programmes and apps require that you enter an access code. Note that once the child lock system has been enabled, it can only be disabled by resetting the television. Press the red button in the on-screen help and find 'Reinstall your television'. The access code described here is not the same as the pin code you have received with your Smart Card.
Change your access code In the Change code menu, enter the current access code to be able to set a new code. Then, enter a new four-digit access code.
Network and Bluetooth settings Make network and Bluetooth settings You can set up your television to a network either with a wired or wireless broadband connection. For the most reliable network connection, Bang & Olufsen recommends making a wired connection. Bang & Olufsen also recommends that you use a separate router and access point – a Network Link router – to ensure the most reliable playback of digital files. You can also connect one or more Bluetooth devices to your television.
Example of recommended setup either wired or wireless. Here, you add a Bang & Olufsen recommended router. Wired setup Connect one end of the Ethernet cable to the router and the other end to the Ethernet socket on the television.* You can then make the wired connection. It is assumed that you have enabled the DHCP service on your network. 1. 2. 3. 4. 5. 6. 7. Make sure that the router is switched on. Press , highlight Settings and press the centre button. Highlight Wireless and Networks and press .
1. 2. 3. 4. 5. 6. Press , highlight Settings and press the centre button. Highlight Wireless and Networks and press . Highlight Wired or wireless and press . Highlight Connect to network and press the centre button. Select WPS with PIN code. Write down the 8-digit pin code shown on-screen and enter it in the router software on your computer. See the guide for the router on where to enter the pin code in the router software. 7. Select Connect to make the connection. 8.
Configure the static IP In the Static IP configuration menu, you can set up your network manually. If the settings are set to configure manually, or if the IP address, netmask, gateway and DNS servers, for some reason, are not assigned automatically, you must enter this information manually. Switch on with your network You can switch on the television from your smartphone or tablet if the television is in standby. The setting Wake on WLAN must be activated.
Clear Internet memory In the Clear Internet memory menu, you can clear all information saved in the memory function of the Internet. Information such as server registration and parental rating settings, your video store app logins, all App Gallery favourites, Internet bookmarks and history is cleared. Interactive MHEG applications can also save so-called 'cookies', on your television. These files will also be cleared.
Android settings Make device settings and personal settings and set up preferences for the Android functions in your television. You can also look up Android specific information. Settings Android settings For more information about Android functions, see www.support.google.com/androidtv.
Re-tune channels Re-tune channels – introduction You can make your television find your TV channels and radio stations for you. Channels and stations are updated automatically, but it is also possible to update manually. Depending on your service provider, some settings are made automatically. Antenna and cable installation You can reinstall or update tuned terrestrial and cable channels which, for example, have been moved by the broadcaster. Follow on-screen instructions.
6. Select Update Digital Channels, then select Next. 7. Select Start to update the digital channels. This can take a few minutes. 8. Select Done when updating has completed. Reinstall channels You can reinstall all channels and leave all other TV settings untouched. If a pincode is set, you will need to enter this code before you can reinstall channels. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Press , highlight Settings and press the centre button. Highlight Channels and press .
Frequency Scan: Select the method of searching for channels. You can select the faster Quick Scan method and use the predefined settings used by most cable providers in your country. If this results in having no channels installed or if some channels are missing, you can select the extended Full Scan method. This method will take more time to search for and install channels. Frequency Step Size: The television searches for channels in steps of 8MHz.
Satellite installation You can install or update tuned satellite channels which, for example, have been moved by the broadcaster. Follow on-screen instructions. Install satellites This television has two built-in satellite DVB-S/DVB-S2 tuners. You can install up to four satellites (four LNBs) on the television. Select the exact number of satellites you wish to install at the start of the installation. This will speed up the installation.
satellite product, you can use these settings to overrule the standard settings. Some providers may give you transponder or LNB values which you can enter here. Satellite CA Modules If you use a CA Module – a Conditional Access Module with a Smart Card – to watch satellite channels, we recommend to do the satellite installation with the CA Module inserted in the television. Most CA Modules are used to decode channels. CA Modules (CI+ 1.
If you have digital satellite channels installed, you can set the television to automatically update these channels. The television updates the channels and saves new channels. New channels are saved in the channels list and are marked with a icon. Channels without a signal are removed and if satellite providers reorder their channel package, the channel list of the television will be updated. The television must be in standby to automatically update channels. You can switch off Automatic Channel Update.
For Add Satellite to be available, the Settings menu must be set up to four satellites in the start of the installation. Remove a satellite You may be able to remove one or more satellites from your current satellite installation. You remove the satellite and its channels. Some satellite providers do not allow removing a satellite. 1. 2. 3. 4. 5. 6. 7. 8. Press , highlight Settings and press the centre button. Highlight Channels and press . Highlight Satellite Installation and press the centre button.
By default, LNB Power is set to On. 22 kHz Tone By default, the tone is set to Auto. Low LO Frequency / High LO Frequency The local oscillator frequencies are set to standard values. Adjust the values only if the product needs different values. Troubleshooting The television cannot find the satellites you want or it installs the same satellite twice; Make sure that the correct number of satellites is set in Settings at the start of the installation.
Integrate your product in a system Integrate your product – introduction The function of integrating of your television with other products may not be available in the current software version. With Network Link you can distribute sound, but not video signals, to other rooms throughout the house. If you connect your television to a Master Link product, you must also use a BeoLink Converter NL/ML (BLC).
The illustration is an example of a link room setup with an audio system with Master Link. The main room television must be connected to the link room system through BeoLink Converter NL/ML if the link room system is an audio or video system with Master Link: 1. Connect an Ethernet cable to the socket marked on the television. Then, run the cable to a router, which is connected to the router with Internet connection. 2.
Distribute sound from video sources Distribution of sound from video sources may not be available in the current software version. In the Sound from video sources menu, you set up whether or not your build-in or connected video sources should be able to distribute sound to other sources connected to your home network.
Service and software update Service and software update – introduction We recommend that you enable automatic software update on your television to ensure that your television always has the latest features and functions. If your television is set up in a system, it is essential that you enable the automatic system update to ensure that all products in your system are kept up to date and are able to communicate. System setup may not be available in the current software version.
Auto system updates – introduction If you have a system setup with several Bang & Olufsen products, the entire system is updated when you check for updates. You should enable automatic software update of the system in the TV menu. You can set the time of day you want automatic software updates to take place to ensure that they do not interfere with the use of your television (may not be available in the current software version), and select whether or not you want to be notified about updates.
Download PUC tables – introduction In the Download more menu, you can download PUC tables either online from the Internet or from a connected USB device. The PUC tables enable you to operate nonBang & Olufsen products with the Bang & Olufsen remote control. If you have more than one connected USB device, you must first select the desired USB device. You can search for peripheral units by entering the connected product's name or you can browse for peripheral units by brand name.
notes. 5. To update the selected tables, highlight Update and press the centre button. 6. When updating has completed, press the centre button. PUC tables are updated separately and are not a part of automatic software update when the Auto system update function is enabled. Delete PUC tables Delete peripheral unit controller tables from the television. Make sure not to delete tables currently used by connected products. 1. In the PUC management menu, bring up Manage existing. 2.
Open Source License README for the source code of the parts of Bang & Olufsen A/S TV software that fall under open source licenses. This is a document describing the distribution of the source code used on the Bang & Olufsen A/S television, which fall either under the GNU General Public License (the GPL), or the GNU Lesser General Public License (the LGPL), or any other open source license. Instructions to obtain copies of this software can be found in the Directions For Use.
libjpeg (8a) This package contains C software to implement JPEG image encoding, decoding, and transcoding.This software is based in part on the work of the Independent JPEG Group.----------------------The authors make NO WARRANTY or representation, either express or implied,with respect to this software, its quality, accuracy, merchantability, or fitness for a particular purpose. This software is provided "AS IS", and you, its user, assume the entire risk as to its quality and accuracy.
http://code.google.com/p/protobufCopyright 2008, Google Inc.All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Google Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
intellectual property or other right of any person or entity.11. The Terms of Use will be governed by and construed in accordance with the laws of Hong Kong.12. Any waiver of any provision of the Terms of Use will be effective only if in writing and signed by HKSARG or its representative.13. If for any reason a court of competent jurisdiction finds any provision or portion of the Terms of Use to be unenforceable, the remainder of the Terms of Use will continue in full force and effect.14.
iptables (1.4.7) iptables is a user space application program that allows a system administrator to configure the tables provided by the Linux kernel firewall (implemented as different Netfilter modules) and the chains and rules it stores. Different kernel modules and programs are currently used for different protocols; iptables applies to IPv4The original download site for this software is : https://android.googlesource.
WITHOUT WARRANTY OF ANY KIND,EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT.IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
of Google Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED.
This TV uses tinyalsa: a small library to interface with ALSA in the Linux kernelThe original download site for this software is : http://github.com/tinyalsaCopyright 2011, The Android Open Source ProjectRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Dnsmasq is a lightweight, easy to configure DNS forwarder and DHCP serverThe original download site for this software is : https://android.googlesource.com/platform/external/dnmasqThis piece of software is made available under the terms and conditions of the GPL v2 license, which can be found below. TomCrypt (1.1) iwedia stack is using tomcrypt for sw decryptionThe original download site for this software is : http://manpages.ubuntu.com/manpages/saucy/man3/libtomcrypt.3.
software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price.
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things.
data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".
that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
that you distribute. 7.
be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. _____________________________ Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License.
derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT.
Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
to help you in the documentation. o freetype-devel@nongnu.org Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc. Our home page can be found at http://www.freetype.org --- end of FTL.TXT --_____________________________ LICENSE ISSUES ============== The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts.
must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Code or ii) the combination of the Original Code with other software or devices. 2.2. Contributor Grant.
fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor.
judgment actions) against Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as "Participant") alleging that: (a) such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such Participant to You under Sections 2.1 and/or 2.
with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. The Original Code is ______________________________________. The Initial Developer of the Original Code is ________________________.
Index HomeMedia 43 Home menu 9 A Android settings 75 Antenna and cable installation 76 Apps 39 Assisted speaker calibration 55 Audio level 24 Auto selection 24 Auto system updates 87 I IR-transmitters 18 Indicator light 10 Internet 41 Integrate your product in a system 84 Integrate your product – introduction 84 B J Basic operation 7 Bass and treble 57 BeoRemote App 6 BeoRemote lists 24 Blanking 24 Bluetooth 74 Bluetooth headphones 42 Judder cancellation 49 L Languages 64 Link to other products 85 Lo
Powered by TCPDF (www.tcpdf.
