BeoVision 4 Guide
BeoVision 4 includes the products shown above. The individual components are referred to by their respective names in the Guide and Reference book. The complete setup is referred to as BeoVision 4.
Contents Introducing your BeoVision 4, 4 Find out how to use the Beo4 remote control and bring up the menus on the screen. Daily use, 7 Find out all there is to know about daily use, including how to turn your system into a Home Theatre for watching movies and how to use teletext functions. Advanced operation, 15 All you need to know about using your system beyond daily use, such as advanced teletext, set-top box operation, and the pincode system.
Introducing BeoVision 4 and Beo4 4 Only the buttons used with this product are shown. Other buttons may be used with, for example, connected equipment. For information about how to operate connected equipment, refer to the Guide enclosed with it. The Beo4 remote control gives you access to all functions. When a function is in use, you are informed via displays on Beo4 or on the screen. Switch on BeoVision 4 TV Switch on a connected set-top box.
Displayed information and menus Option menu Information about the selected source is shown at the top of the screen. On-screen menus allow you to adjust settings. Menu 1 Timer play 2 TV list 3 Setup Source Pr Start TV TV 12 VOL 30 The selected source is shown briefly when you switch it on. Volume level is shown while you adjust it, and disappears after a few seconds.
Daily use This chapter contains information about the basic functions of your BeoVision 4. For information about more advanced operation, such as timed playback and standby, and the pincode system, refer to the chapter ‘Advanced operation’ on page 15.
Watch TV 8 Select a TV channel directly or via a list. Select a new source, adjust the sound volume or change the sound type or language. Select a TV channel Bring up a TV list When you switch the system on, the last channel viewed appears on the screen. You can see a list of all your TV channels at any time. The list contains channel numbers and names, and can contain 99 TV channels.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 BBC 1 BBC 2 ITV Super Ch SKÝ ZDF Children CNN ........ ........ ........ Eurosprt ........ ........ MTV The TV channel list. Dotted lines indicate that a channel has been stored, but not named. An empty slot in the list indicates that no channel has been stored. Adjust volume or mute the sound Change sound type or language You can adjust volume or mute the sound at any time.
Home Theatre 10 You can extend your system into a fully equipped Home Theatre by connecting six Bang & Olufsen loudspeakers and a BeoLab 2 subwoofer*. When you switch on one of the sources, speakers in a surround sound system can be cut in or out, depending on what kind of sound suits the source you are using. A speaker combination may be switched on automatically. This happens if a broadcasted programme contains information about the number of speakers to be switched on.
Make the picture fill out the screen BeoVision 4 always ensures you the best possible picture. It automatically adapts the picture so that it fills out as much of the screen as possible. However, you can still choose the format you prefer. When you select a format yourself, the automatic format selection is deactivated.
Teletext 12 If you select a channel and the broadcaster offers a teletext service, BeoVision 4 gives you access to teletext pages. To make your favourite teletext pages appear first when you bring up teletext, store them as memory pages. When you store the teletext subtitles page as memory page number four, you can activate subtitles for that particular channel automatically.
Day-to-day use of memory pages Activate subtitles from teletext You may wish to refer to your teletext memory pages quickly, for example, if you are leaving for work and wish to check traffic information on a teletext service. You can activate subtitles for a channel, if that channel offers teletext subtitles. The teletext subtitles page number can often be found in an index on teletext page 100.
See two sources at the same time 14 Your Beo4 remote control gives you access to a dual-screen function for viewing two video sources at the same time. For example, you can view a videotape playback and a TV programme at the same time, provided that the selected sources are available in your system. While watching a programme or recording, you can divide the screen between the current programme or recording (picture A in the second illustration) and a new programme or recording (picture B).
Advanced operation Find out how to operate BeoVision 4 beyond daily use. This is also the chapter that informs you of how to operate a connected set-top box.
Advanced teletext functions 16 BeoVision 4 supports three extra teletext functions: text enlargement for easy reading, placement of a teletext page over a TV picture, and display of hidden text, such as the answer to a quiz or joke. BeoVision 4 can also notify you when a desired page has been found or updated. This is useful, for example, if you want to see the latest news headlines while watching TV.
Go directly to a page via Fastext Some teletext broadcasters offer a Fastext service that enables you to step directly to one of four linked teletext pages. While the system is switched on… Press to bring up teletext Press to find a Fastext page, or… …enter the page number using the number buttons TEXT m p 0–9 A teletext page with the colour bar at the top right indicating that it is a Fastext page. Press one of the coloured buttons on Beo4 to gain access to the Fastext function.
Make your BeoVision 4 start and stop automatically 18 You can use the timed play function if there is a programme you do not want to miss, or if you want a morning wake-up call. Use timed standby to make BeoVision 4 switch off automatically when you leave for work in the morning. Enter as many as eight Timer settings, and view all the Timer settings you have entered. From this list, you can edit or delete your Timer settings.
Timed play via teletext To activate the timed play function View, edit or delete a Timer It is also possible to program timed play settings via teletext. You must activate the timed play function in order for your Timers to be executed. Bring up an on-screen list of the Timer settings you have entered. From this list, you can edit or delete your Timer settings. To enter timed play settings via teletext… > Press MENU while Start (start) is highlighted to bring up teletext.
Set-top box operation 20 The built-in Set-top Box Controller acts as an interpreter between the set-top box of your choice and the Beo4 remote control. When a set-top box is connected, you can use the Beo4 remote control to gain access to the programmes and functions offered by the set-top box.
Universal Beo4 operation Use the set-top box’s own menu Use a set-top box in a link room If you know which Beo4 button activates the function you want, you can bring up the function without activating the Set-top Box Controller menu first. Once you have activated your set-top box, you can operate the set-top box’s own menus, such as the Program Guide, via Beo4. When your set-top box is connected to the television in the main room, you can operate the set-top box from the link room television.
The pincode system 22 You choose whether or not to activate the pincode system. The pincode system is deactivated when you delete your pincode. The pincode system is intended to make normal use of BeoSystem 2 impossible for someone who does not know the pincode. When BeoSystem 2 has been disconnected from the mains for 15– 30 minutes, the pincode system goes into effect. When reconnected and switched on, BeoSystem 2 automatically switches itself off after four minutes.
Use your pincode Did you forget your pincode? If BeoSystem 2 has been disconnected from the mains for 15–30 minutes, BeoSystem 2 prompts you for the pincode when you switch it on. You may not be able to switch the system on immediately – wait approximately 30 seconds and try again. Contact a Bang & Olufsen retailer to receive a five-digit mastercode.
Tuning and preference settings This chapter informs you of how to tune in and add new TV channels, make adjustments to TV channels, and enter your own settings for picture and sound. Tune in TV channels, 26 • Find available channels • Add new channels Edit tuned TV channels, 28 For information about how to set up your system and connect additional video equipment, refer to the chapter ‘Placement, connections and maintenance’ on page 4 in the Reference book.
Tune in TV channels 26 You can make BeoVision 4 find your TV channels for you. Preset up to 99 different TV channels on channel numbers of their own and give each channel a distinct name. Find available channels When you set up BeoVision 4 for the first time, you can tune in the TV channels that are available in your area via the TV tuning menu. BeoVision 4 finds available channels and stores them by number and name. You can tune in new channels or retune previously deleted channels.
Add new channels You can add new or previously deleted TV channels to your TV list at any time. > > > > > > TV tuning 1 2 3 4 Edit TV list Add program Auto tuning Manual tuning Freq Pr 210 12 Press MENU to bring up the main menu. Press 3 to bring up the Setup menu. Press GO to bring up the Tuning menu. Press GO again to bring up the TV tuning menu. Press 2 to bring up the Add program menu. Press m to start adding new channels. The Freq (frequency) and Pr (program) fields show tuning progress.
Edit tuned TV channels 28 You can make adjustments to your tuned TV channels at any time, or tune in channels not stored during auto tuning. You can also enter settings before you tune in channels. These may include choosing a broadcast system for certain types of channels, or setting up a connected decoder to be switched on automatically whenever a coded channel is switched on.
Move tuned channels You can rearrange the order in which your channels appear when you switch channels, as well as in the on-screen TV list. TV tuning 1 2 3 4 Edit TV list Add program Auto tuning Manual tuning > > > > > > 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 BBC 1 BBC 2 ITV SUPER CH Sky ZDF CHILDREN CNN ........ ........ ........ EUROSPRT ........ ........ MTV Press >> to move > > > > Press MENU to bring up the main menu. Press 3 to bring up the Setup menu.
>> Edit tuned TV channels Name tuned channels BeoVision 4 automatically names your tuned channels during auto tuning, if possible, but you can rename your channels at any time. > > > > > TV tuning 1 2 3 4 Edit TV list Add program Auto tuning Manual tuning > 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 BBC 1 BBC 2 ITV SUPER CH SKY ZDF CHILDREN CNN ........ ........ ........ EUROSPRT ........ ........
Delete tuned channels You can remove all your unwanted tuned channels from the TV list. > > > > > TV tuning 1 2 3 4 Edit TV list Add program Auto tuning Manual tuning > 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 BBC 1 BBC 2 ITV SUPER CH SKY ZDF CHILDREN CNN ........ ........ ........ EUROSPRT ........ ........ MTV Press GO to delete Del? > > > > Press MENU to bring up the main menu. Press 3 to bring up the Setup menu. Press GO to bring up the Tuning menu.
Register additional video equipment 32 If you connect additional video sources or equipment to BeoSystem 2, you must register the equipment in the Connections menu. What is connected? Registering the equipment connected to BeoSystem 2 enables you to activate it with the Beo4 remote control. The settings you select in the Connections menu tell BeoSystem 2 what is connected.
Choose a set-top box A list of set-top boxes to choose from appears when you register a set-top box in the Connections menu. Decoder Decoder(1)… for a primary decoder or expander box STB (DTV), STB (V.
>> Register and use additional video equipment Get access to additional video equipment Some of the connected equipment is accessible via the Beo4 remote control. Press to switch on a video recorder V MEM Press repeatedly to display DVD2* on Beo4 LIST Press to switch on a second video recorder GO Press repeatedly to display V.AUX on Beo4 LIST Press to switch on a source registered as V.AUX, such as a set-top box GO In order to display V.
Adjust picture and sound settings Picture and sound settings are preset from the factory to neutral values which suit most viewing and listening situations. However, if you wish, you can adjust these settings to your liking. Adjust picture brilliance, colour or contrast. Sound settings include volume, bass, treble and loudness. You can also adjust subwoofer level, if BeoLab 2 is part of your setup.
>> Adjust picture and sound settings Change volume, bass, treble or loudness You can adjust sound volume, select a speaker combination or adjust the speaker balance directly on Beo4 at any time without bringing up a menu, but you must bring up the Sound menu in order to be able to adjust bass, treble or loudness. To change volume, bass, treble or loudness… > Press MENU to bring up the main menu. > Press 3 to bring up the Setup menu. > Press 2 to bring up the Sound* menu.
See the name of the active sound system The surround sound module in your television allows you to see which active sound system is currently playing on the source or programme you are watching. The sound system is an integrated part of a programme or, for example, a DVD disc. Therefore, as the sound system is distributed to you from the broadcaster, you can not preset a sound system in this menu.
Set the time and date 38 BeoVision 4 has a built-in clock that displays the time on request. When you preset BeoVision 4 to switch itself on or off at a particular time, or when you preset a timed recording of a programme on a connected BeoCord V 8000 video tape recorder, the clock ensures that these features are switched on and off at the right times. The simplest way to set the clock is to synchronise it with a tuned TV channel’s teletext service via the Clock menu.
Index Beo4 remote control Add a ‘button’ to the Beo4 list, Reference book p. 32 Changing the Beo4 batteries, Reference book p. 8 Get access to extra equipment via Beo4, 34 Introducing BeoVision 4 and Beo4, 4 Move extra ‘buttons’, Reference book p. 33 Remove a ‘button’ from the Beo4 list, Reference book p. 33 Set up Beo4, Reference book p. 32 Using Beo4, 4 BeoLink BeoVision 4 in a link room – connection, Reference book p. 30 BeoVision 4 in a link room – operation, Reference book p.
>> Index High Definition (HD) PC Access a HD source, Reference book p. 23 Connect a HD source, Reference book p. 22 Register a HD source, Reference book p. 23 Access a PC, Reference book p. 23 Connect a PC, Reference book p. 22 Register a PC, Reference book p.
Socket panels Timer Additional sockets, Reference book p. 10 AV and aerial socket panel, Reference book p. 9 Close-up socket panel on BeoSystem 2, Reference book p. 12 Connect additional equipment, Reference book p. 18 Plasma screen socket panel, Reference book p. 11 Speaker and digital input socket panel, Reference book p.
For your information… This product fulfils the conditions stated in the EEU directives 89/336 and 73/23. Til det norske marked: Mekaniske og elektroniske komponenter i produktene slites ved bruk. Det må derfor påregnes reparasjoner og utskiftning af komponenter innenfor kjøpslovens reklamasjonstid, som må regnes som vedlikehold av produktene. Slik vedligehold gir ikke grunnlag for å rette mangelskrav mot forhandler eller leverandør, og må bekostes af kjøper.
www.bang-olufsen.
