Operation Manual

28
For Adaptive Sound Technology to
gure out the exact position of each
speaker, you will need to decide on two
xed points, Point A and Point B, before
you can enter the settings of the speaker
setup menu. These points could, for
example, be on a wall.
Guidelines for xing Point A and Point B:
1 Fix the points in the edge of a room, so all
speakers are placed on the same side of
an imaginary line between Point A and
Point B.
2 Fix the points far apart from each other,
at least two metres.
3 From both Point A and Point B you should
be able to see all speakers in the setup.
However, it is acceptable if a piece of
furniture is in the way.
Examples of two possibilities for points A
and B with the imaginary line from one
point to the other. You can preset speaker
combinations for several listening positions
such as at the sofa when you watch television,
at the dining table or when you sit in an
armchair reading.
Points A and B
>> Adaptive Sound Technology
A
(1)
B
(1)
A(2)
B(2)