Operation Manual

30
Select the speakers to be activated in TV
mode and, if you have connected a
projector, in Cinema mode. You can also
make up to ve customised listening
presets, such as at the dining table or in
a favourite armchair. Select three to
seven* speakers and up to two
subwoofers to be activated for a preset
and determine the distance from your
listening position to three of the
activated speakers.
For each customised listening preset it is
also possible to rotate the perceived
sound 360 degrees around the listening
position. The default rotation is 0 degrees
which is the direction from your listening
position to the television.
If your speakers are placed correctly for
your listening positions, it is recommended
that you disable Adaptive Sound
Technology and set the speaker roles,
distances and levels. If you activate
fewer than three speakers, it is not
possible to enable the Adaptive Sound
Technology and you must set the speaker
roles, distances and levels. For further
information about speaker roles,
distances and levels, see pages23–25.
*A stereo speaker such as a BeoLab 7-1 or 7-2
counts as two speakers if fewer than six
speakers are activated.
The distance from your listening position to
any speaker in a listening preset should not
exceed 10 metres.
To set speaker presets …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight SOUND.
> Press the centre button to bring up the
SOUND SETUP menu and highlight
LISTENING PRESETS.
> Press the centre button to bring up the
LISTENING PRESETS menu and highlight
TV, CINEMA or a custom preset eld.
> Press the centre button to bring up the
highlighted menu.
> Use the navigation button left or right to
enable or disable the Adaptive Sound
Technology.
> Use the navigation button left or right to
activate the preferred speakers. Three to
seven speakers as well as up to two
subwoofers can be activated.
> Check that the Adaptive Sound Technology
is enabled or disabled as you desire.
> Press the centre button to store and bring
up the next menu. If you have selected
OFF to disable the Adaptive Sound
Technology, see pages23–25 about how
to assign roles to speakers, set the speaker
distances and calibrate the sound level.
> Enter the horizontal distance in metres
between your listening position and each
speaker making a sound.
> If you are setting a customised preset and
ADAPTIVE SOUND TECHNOLOGY is
enabled, highlight ROTATION and select
how much the sound stage should be
rotated. A sound will be produced from
the setup if a source is playing and you
rotate until the sound is experienced from
the desired direction.
> Press the centre button to store and
return to the LISTENING PRESETS menu.
During rst-time setup, press the green
button to continue the rst-time setup
procedure when you have created the
desired presets.
Listening presets
>> Adaptive Sound Technology
CIN EMA
TV
Example of a listening position for watching
tele vision and Home cinema. You select
which speakers should be active for each
situation.