User Guide Owner manual

LINK ROOM WITH BEOVISION AVANT
48
Press to switch on your TV
Then operate your TV as usual…
Main room video sources…
Press to switch on to Satellite
Press to switch on your V.TAPE
recorder
Main room audio sources…
Press to switch on radio
Press to start the CD player
Press to start the audio tape
recorder
Continue to operate these main
sources in the usual manner…
To watch sources from your main
system which are also available in
your link room system…
Press LIST until LINK* is displayed
Press to watch TV from your main
system
A Timer play, programmed via the
main system, can also be executed on
your Link room BeoVision Avant.
*Note: In order to display LINK on Beo4, you must
add the function to the Beo4 list of functions, see
the following page for further instructions.
Before you start…
Please refer to the Setting-up guide for further
instruction of how to prepare BeoVision Avant for
use in a Link room.
If you have BeoLink installed in your
home and choose to place your Avant
in a link room, just operate your
BeoVision Avant as if it was placed in a
main room.
You can watch and listen to the sources
available in your link room BeoVision
Avant. The video and audio sources in
your main room are also available.
If you wish to watch a TV programme
from your main room TV instead of
your link room TV, e.g. in order to
watch a decoded TV programme, you
must press LIST until it displays LINK*
and then press TV.
Using BeoVision Avant in a link room
TV
SAT
V TAPE
RADIO
CD
A TAPE
TV
LIST
then