User Manual

5. Maintenance
5.1 Type - c line charging
During the charging process, the meter pen should be
removed from the measuring circuit to avoid the danger of
lectric shock.
If the " " symbol appears, it means to charge.
5.2 Replace the test pen
When replacing the stylus, you must replace the same or
the same grade of the table. Pen meter must be in good
condition, pen grade: 1000V 10A.
Note:
If the insulation layer of the pen is damaged, such as
exposed wire of the wire, the pen must be replaced.
6. The attachment
1)Test the pen Grade: 1000V 10A A pair of
2)Directions for use A copy of the
3)thermocouple a
4)Charging line Type-c a
115
Maintenance
warning
warning