Owner manual
14
CLEANING AND OILING THE BANKS RAM-AIR FILTER
Notification
The Banks Ram-Air Filter comes pre-oiled and no
oiling is necessary for initial installation.
Use Banks ram-Air Filter cleaning system (part
#90094) available from Gale Banks Engineering
to service the Air Filter. Follow the instructions
included with the cleaning system to clean and
re-oil your Banks Ram-Air Filter.
PRE-CLEANING
SPRAY-ON CLEANING
Spray Banks air-filter
PAN CLEANING
Large air-filter elements can be
pan of Banks air-filter cleaner.
minutes.
CLEANING HINTS
Use only Banks air-filter cleaner. NO gasoline
NO NO caustic cleaning
NO NO
NO NOs
RINSE OFF
low-pressure water. Tap
filter.
DRYING HINTS
USE COMPRESSED AIR – DO NOT USE OPEN FLAME –
DO NOT USE HEAT DRYERS!
COMPRESSED AIR WILL BLOW HOLES IN THE ELEMENT.
AEROSOL OILING
After cleaning air filter always
reoil before using. Spray Banks
OILING HINTS
NEVER
REINSTALL
clips to factory specifications.
DO NOT DISCARD
PERFORMANCE HINTS
O.
CAUTION!
protection use an air-filter sealing grease on rubber
6.
9.
1.
3.
4.
5.