User guide

96458 v.1.0 11
18. Locate the Banks turbo intake
hose, tube, and hose clamps from your
Banks Ram-Air kit. Loosely assemble
the Banks intake hose to the Banks
intake tube with the supplied hose
clamps. Attach the turbo intake hose
to the turbo intake tube. Leave the
hose clamps loose.
19. Install the Banks Ram-Air intake
tube into the Banks bellows. Tighten
all the hose clamps to secure the
Banks intake tube. See Figure 7.
CAUTION: Ensure Intake tube is not
touching any engine components.
20. Fasten the Banks air filter cover
to the Banks air filter housing using
the Banks cover screws and tighten.
21. Re-attach the MAF sensor
connector to the MAF sensor in the
Banks intake tube.
22. Re-connect battery grounds.
You have successfully completed
the installation of the Banks Ram-Air
Intake system. See Figure 8. Make
sure to check all hose clamps for
tightness and connectors for a sure fit.
Make sure that the intake tube is not
touching any engine components.
Figure 8- Completed System Appearance