User Manual

97229 v.8.0 17
Section 3
BANKS SPEEDBRAKE POWERPDA SOFTWARE & INSTALLATION
The SpeedBrake PowerPDA software is
supplied on a Secure Digital (SD) media
card. The software should be installed on
the Palm Tungsten E2 and run from main
memory. You can use the additional
space on the SD card to store music,
photos and other data. Refer to your
device instruction manual for using SD
cards to store data. You should leave
a copy of the SpeedBrake PowerPDA
software on the SD card as a backup for
future reference.
1. Insert the SD card into the slot on the
top of the Palm Tungsten E2.
NOTE: the contents of the SD card
should appear on the screen. (The
“BanksBrake” name). See Figure 18.
2. Press the ‘Menu’ key on the bottom
of the Palm Tungsten E2 (beneath the
‘Home’ key, see Figure 15). Then select
‘Copy’. See Figure 16.
Figure 15 Front view
HOME KEY
5-WAY
NAVIGATOR
MENU KEY
CENTER BUTTON
Figure 16