User Manual

18 97229 v.8.0
3. In the ‘Copy From’ drop down menu
select “Card”. See Figure 17. The ‘Copy
To’ selection will automatically change
to “Device” (Figure 18). Select on the
“BanksBrake” name, if it is not already
selected or there is more than one item
in the list. Touch the “Copy” button.
A dialog box will appear, indicating
the Palm Tungsten E2 is copying the
software from the SD card (Figure
19). Once completed, press the “Done”
button.
4. Select the drop-down menu in the
upper right hand corner of the screen.
Touch the button labeled ‘All’. The Banks
SpeedBrake PowerPDA software is now
installed. You may now remove the SD
Card from its slot.
5. To start the SpeedBrake PowerPDA
software, touch the icon called
“BanksBrake”. See Figure 20.
-END, SECTION 4-
Figure 20 Shown with Tuner pro-
gram installed.
Figure 17
Figure 19
Figure 18