Manual

96831 v.6.0 15
Press the ‘Power’ button in the
ENVIRONMENT SELECT screen to
access the Banks Power Tuner and/
or combo Banks Power Tuner/
SpeedBrake.
Press the ‘Safety’ button on the
ENVIRONMENT SELECT screen to
access the SpeedBrake and or combo
Tuner/SpeedBrake.
Power Environment, Safety
Environment and Combo Power/Safety
Screens all display the following:
five user-selectable Gauges, Status
Indicator, and Brake or Power level.
See Figure 11.
Press the Wrench icon to see the
‘Adjustments’ menu.
Select any five gauges that you
want to show on your display. To
change a gauge, simply press on it
and you will be taken to the ‘Gauge
Placement’ screen featuring the gauge
you selected. Refer to Section 15
for instruction on how to change
each gauge. The gauges can also
be changed to display in English or
metric units. Refer to Section 14 for
instruction on how to change units.
The Status Indicator in the upper right-
hand corner of the screen displays the
communication status between the
Banks iQ and Banks Power Tuner and/
or SpeedBrake. In the event that an
on-screen alert or Banks Power Tuner/
SpeedBrake malfunction is triggered,
a status alert will appear in the upper
right-hand corner of the screen. See
Figure 40. Press on the status alert
for more information about the alert
condition.
Below the Status indicator are the Up
and Down arrows. Press on the arrows
to increase or decrease Power level,
Brake strength, or target speed with
the corresponding change displayed in
between the arrows. Refer to Section
6, 7, & 8 for instruction on use.
For ‘Braking’ or ‘Braking & Power’
environment, the active device or
mode will be highlighted in red in the
lower part of the screen. Refer to
Section 7 & 8 for instruction on use.
On the lower left hand corner of the
screen is the ‘Banks iQ Home’ icon,
Section 5
WORKING WITH POWER ENVIRONMENT, SAFETY ENVIRONMENT,
AND COMBO POWER/SAFETY SCREEN
Figure 11 Combo Tuner and Brake Screen Shown.