Manual

96831 v.6.0 23
8. When the performance test is
finished, Banks iQ immediately displays
a results screen showing elapsed
time/speed/distance measurements
along with default gauge readings
for the run. See Figure 21. Each
completed Performance Test is saved
for future analysis. Exit the result
screen and return to the Performance
Environment by pressing the ‘X’ in the
upper right-hand corner.
NOTE: If a micro SD card is present in
the Banks iQ, the data from each run
will automatically be saved to the card
as a Comma Delimited file.
Viewing Saved Performance Tests
9. To view a previously completed
Performance Test touch the button
labeled ‘Recall Saved’.
10. Use the Up and Down arrow
buttons to highlight the Performance
Test you want to review.
NOTE: All tests are date and time
stamped to conveniently help search
for the desired Test run.
11. Touch the button labeled ‘Review
Test’ to view in detail the results of the
saved Performance Test.
Use the ‘Left’ and ‘Right’ arrow buttons
to move the cursor one frame at a time
in the displayed graph area. Moving
between the frames will automatically
update the displayed parameter values.
NOTE: Use of this feature will be
suspended while the vehicle is in motion.
Only when the Banks iQ senses that the
vehicle’s speed is zero can you review
your saved tests.
Deleting Saved Performance Tests
12. To delete a previously saved
Performance Test, highlight the saved
test you wish to delete and Press the
‘Delete’ Button
13. A pop up window labeled ‘Confirm
Delete’ will ask you to confirm the
deletion of the test.
14. Press the button labeled ‘Yes’ to
confirm or ‘No’ to decline.
15. Press the Banks Home iQ icon to
return to the ‘Environment Select’ menu.
-END, SECTION 9-
Figure 21 Performance Test Results