Manual

96831 v.6.0 31
3. See Figure 31. In the ‘LCD
Properties’ screen, press ‘Enable’ to
activate or press ‘Disable’ to deactivate
the Auto Dimming feature. The active
selection will be highlighted red.
4. Touch the ‘Left’ or ‘Right’ arrow
buttons to adjust LCD brightness to the
desired level for daytime and nighttime
operation. Your brightness selection will
preview automatically as changes are
made.
5. Set the transition time for auto
dimming by pressing the ‘Hour’ and the
‘Min’ (minute) buttons below the day and
night time.
6. Press the ‘Banks iQ’ icon on the
lower left hand corner to return to the
Environment screen. Press the ‘Return
‘ icon to go back to the ‘Adjustments’
menu.
Touch Screen Calibration
1. Press the ‘Touch Screen Calibration’
button in the ‘Adjustments’ menu.
2. Follow the on-screen instructions and
press the targets as they appear on the
display screen.
3. Press the ‘Banks iQ’ icon on the
lower left hand corner to return to the
‘Adjustments’ menu.
GPS Speed Correction
The Banks iQ speedometer uses GPS
Speed Correction to deliver improved
accuracy over your vehicle’s stock unit. It
even corrects for non-stock wheels and
tires. Calibration is simple and there is no
need to use a pace vehicle or manually
input tire size.
1. Find an open, uncrowded stretch of
road.
2. Press the ‘GPS Speed Correction’
button.
3. Maintain a steady speed. Any speed is
acceptable. Cruise control maybe used.
Figure 30
Day/Night
Switch Icon
Figure 31