Product Description

BANLAW PRODUCT DATA SHEET PRODUCT NAME

Doc ID: PRH-FMG-76 Version: 0.38

Page 11 of 15

Please ensure you have the latest version of this document.

Step

Figure

6 INSTALLATION GUIDE

Prior to commencing the installation

onduct a

Health Safety and Environment (

HS&E

WHS) risk assessment (e.g. SWMS or JHA). For a typical installation, particular attention

is drawn to the following areas:

• Isolation and bleeding of residual fuel pressure.

• Appropriate personal protective equipment (PPE).

• Use of appropriate tools and equipment.

• Use of trained, qualified and competent personnel.

• Barricade the area (if required) to restrict unauthorised personnel and vehicle

access.

• Place Personal Locks, Tags etc. on equipment required to be positively isolated.

• The presence of a spill kit designed to manage fuel spills.

• The presence and good working order of fire suppression devices such as fire

extinguishers.

• If performing any work within a zone/area classified as hazardous (i.e. explosive

atmosphere), strictly adhere to all necessary precautions etc. applicable to work in

such areas. Such precautions are likely to include the use of specialist (certified)

equipment.

• Assessment of and adherence to all relevant Regulatory and Statutory guidelines.

• Assessment of and adherence to all relevant product OEM installation guidelines.

This section describes the installation procedure of Wireless Swivel:

• Screw the hose tail into the Wireless Swivel.

• Screw the Nozzle onto the Wireless Swivel.

• Apply Loctite 567 thread sealant to the threaded hose-swivel-nozzle joints.

On completion of the installation the Wireless Swivel must be registered with the Depot, see section 4.

Loctite products should be applied sparingly to the swivel threads for the Banlaw

FuelTrack

system installation. Excessive use of Loctite products between the

threads may cause an electrical resistance which may provide a significant enough

voltage drop to cause the FuelTrack

system to not detect a positive connection.

Do not use Thread Seal Tape for any Banlaw FuelTrackTM assembly.