Product Description

BANLAW PRODUCT DATA SHEET PRODUCT NAME
Doc ID: PRH-FMG-76 Version: 0.38 Page 14 of 15
Please ensure you have the latest version of this document.
8 TROUBLESHOOTING
If the Wireless Swivel stops transmitting vehicle’s information, please follow the below troubleshooting
guide.
ISSUE
POSSIBLE
SOLUTION(S)
No
LED
activity
1.
Wireless Swivel
is asleep, move assembly and observe red
LED
flashes at 1.5 times / second. If there is still no LED activity,
then proceed to step 2.
No
LED
activity after
movement
2.
If the
Wireless Swivel
fails to activate after movement, reset
the Wireless Swivel using a magnet.
3. Place a magnet on the magnet reset zone (see figure 2) and
remove rapidly. Observe red and green LEDs flash rapidly for a
second. Then no activity for approx. 6 seconds then red LED
flashes at 1.5 times / second.
No LED activity after reset
4.
If there is still no
LED
activity
either the battery is discharged or
the electronics has failed, replace the electronic module.
Advanced controller fails to
identify the Wireless Swivel
5.
Observe
Wireless Swivel
led activity and troubleshoot as per
steps 1 to 4. If the swivel is still not recognised, replace the
swivel.
6. If the fault persists, troubleshoot the Advanced Controller as
per Advanced Controller Installation and Maintenance
Procedure.