Cut Sheet
Table Of Contents
- Contents
- 1 Features
- 2 Overview
- 3 Specifications
- 4 Installation Instructions
- 5 Configuration Instructions
- 5.1 Install the Software
- 5.2 Define the Communication
- 5.3 Alignment
- 5.4 Parameter Setup Files (PSFs)
- 6 Operating Instructions
- 7 Additional Information
- 8 Accessories
- 9 Banner Engineering Corp. Limited Warranty
1
+
–
+
–
10–30 V dc
Gate
16–30 V dc
1.2 A Max.
234
5678
9
101112131415
F1
BROWN
BLUE
DRAIN (BARE)
BLACK
WHITE
EMITTER and
RECEIVER CABLES
V– V+
RS-485
500 mA
Max.
Out 1
30 V
150 mA
Max.
ALARM
Power
4.4.2 MACP-1 Controller Wiring
Output 1: Controller terminal #9 (OUT1) is an open-collector PNP transistor switch rated at 30V dc max., 150 mA max. It is protected
against overload and short circuits.
Alarm: Controller terminal #15 (ALARM) is an open-collector PNP transistor switch rated at 30V dc max., 150 mA max. It is protected
against overload and short circuits.
Both outputs are current sourcing.
1
+
–
+
–
10–30 V dc
Gate
16–30 V dc
1.2 A Max.
234
5678
9
101112131415
F1
BROWN
BLUE
DRAIN (BARE)
BLACK
WHITE
EMITTER and
RECEIVER CABLES
V- V+
RS485
Com
30 V
150 mA
Max.
ALARM
30 V
150 mA
Max.
Out
Power
V+ V+
4.4.3 MACN-1 Controller Wiring
Output 1: Controller terminal #9 (OUT1) is an open-collector NPN transistor switch rated at 30V dc max., 150 mA max. It is protected
against overload and short circuits.
Alarm: Controller terminal #15 (ALARM) is an open-collector NPN transistor switch rated at 30V dc max., 150 mA max. It is protected
against overload and short circuits.
Both outputs are current sinking.
A-GAGE
®
MINI-ARRAY
®
Measuring Light Screen System
12 www.bannerengineering.com - Tel: 763.544.3164